Home Home > GIT Browse
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <m.chehab@samsung.com>2013-11-02 05:11:47 -0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-12-04 11:06:35 -0800
commit5e3c7ff0b050a7c9dd7319f4ca7cfebd3903d013 (patch)
tree4c62112e2fb6a1810b8f6a5a3acee894cea4f87a
parenta385eab2d1f958759f9c23923b7749b0505285f6 (diff)
media: dvb-frontends: Don't use dynamic static allocation
commit 37ebaf6891ee81687bb558e8375c0712d8264ed8 upstream. Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r--drivers/media/dvb-frontends/af9013.c14
-rw-r--r--drivers/media/dvb-frontends/af9033.c23
-rw-r--r--drivers/media/dvb-frontends/cxd2820r_core.c21
-rw-r--r--drivers/media/dvb-frontends/rtl2830.c14
-rw-r--r--drivers/media/dvb-frontends/rtl2832.c14
-rw-r--r--drivers/media/dvb-frontends/tda10071.c25
6 files changed, 96 insertions, 15 deletions
diff --git a/drivers/media/dvb-frontends/af9013.c b/drivers/media/dvb-frontends/af9013.c
index a204f2828820..fb504f1e9125 100644
--- a/drivers/media/dvb-frontends/af9013.c
+++ b/drivers/media/dvb-frontends/af9013.c
@@ -24,6 +24,9 @@
#include "af9013_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct af9013_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
@@ -50,16 +53,23 @@ static int af9013_wr_regs_i2c(struct af9013_state *priv, u8 mbox, u16 reg,
const u8 *val, int len)
{
int ret;
- u8 buf[3+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->config.i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 3 + len,
.buf = buf,
}
};
+ if (3 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = (reg >> 8) & 0xff;
buf[1] = (reg >> 0) & 0xff;
buf[2] = mbox;
diff --git a/drivers/media/dvb-frontends/af9033.c b/drivers/media/dvb-frontends/af9033.c
index a777b4b944eb..30ee59052157 100644
--- a/drivers/media/dvb-frontends/af9033.c
+++ b/drivers/media/dvb-frontends/af9033.c
@@ -21,6 +21,9 @@
#include "af9033_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
struct af9033_state {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
@@ -40,16 +43,23 @@ static int af9033_wr_regs(struct af9033_state *state, u32 reg, const u8 *val,
int len)
{
int ret;
- u8 buf[3 + len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = state->cfg.i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 3 + len,
.buf = buf,
}
};
+ if (3 + len > sizeof(buf)) {
+ dev_warn(&state->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = (reg >> 16) & 0xff;
buf[1] = (reg >> 8) & 0xff;
buf[2] = (reg >> 0) & 0xff;
@@ -161,7 +171,14 @@ static int af9033_wr_reg_val_tab(struct af9033_state *state,
const struct reg_val *tab, int tab_len)
{
int ret, i, j;
- u8 buf[tab_len];
+ u8 buf[MAX_XFER_SIZE];
+
+ if (tab_len > sizeof(buf)) {
+ dev_warn(&state->i2c->dev,
+ "%s: i2c wr len=%d is too big!\n",
+ KBUILD_MODNAME, tab_len);
+ return -EINVAL;
+ }
dev_dbg(&state->i2c->dev, "%s: tab_len=%d\n", __func__, tab_len);
diff --git a/drivers/media/dvb-frontends/cxd2820r_core.c b/drivers/media/dvb-frontends/cxd2820r_core.c
index 7ca5c69dd200..51447a04d8f2 100644
--- a/drivers/media/dvb-frontends/cxd2820r_core.c
+++ b/drivers/media/dvb-frontends/cxd2820r_core.c
@@ -21,12 +21,15 @@
#include "cxd2820r_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple registers */
static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
u8 *val, int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = i2c,
@@ -36,6 +39,13 @@ static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
@@ -55,7 +65,7 @@ static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
u8 *val, int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = i2c,
@@ -70,6 +80,13 @@ static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c
index 362d26d11e82..7efb796c472c 100644
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -27,20 +27,30 @@
#include "rtl2830_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
/* write multiple hardware registers */
static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len)
{
int ret;
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
- .len = 1+len,
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c
index facb84841518..b8dd0a135461 100644
--- a/drivers/media/dvb-frontends/rtl2832.c
+++ b/drivers/media/dvb-frontends/rtl2832.c
@@ -22,6 +22,9 @@
#include "dvb_math.h"
#include <linux/bitops.h>
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
int rtl2832_debug;
module_param_named(debug, rtl2832_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
@@ -162,16 +165,23 @@ static const struct rtl2832_reg_entry registers[] = {
static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
{
int ret;
- u8 buf[1+len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.i2c_addr,
.flags = 0,
- .len = 1+len,
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c
index e79749cfec81..8ad3a57cf640 100644
--- a/drivers/media/dvb-frontends/tda10071.c
+++ b/drivers/media/dvb-frontends/tda10071.c
@@ -20,6 +20,9 @@
#include "tda10071_priv.h"
+/* Max transfer size done by I2C transfer functions */
+#define MAX_XFER_SIZE 64
+
static struct dvb_frontend_ops tda10071_ops;
/* write multiple registers */
@@ -27,16 +30,23 @@ static int tda10071_wr_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
int len)
{
int ret;
- u8 buf[len+1];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = priv->cfg.demod_i2c_addr,
.flags = 0,
- .len = sizeof(buf),
+ .len = 1 + len,
.buf = buf,
}
};
+ if (1 + len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
buf[0] = reg;
memcpy(&buf[1], val, len);
@@ -56,7 +66,7 @@ static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
int len)
{
int ret;
- u8 buf[len];
+ u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = priv->cfg.demod_i2c_addr,
@@ -66,11 +76,18 @@ static int tda10071_rd_regs(struct tda10071_priv *priv, u8 reg, u8 *val,
}, {
.addr = priv->cfg.demod_i2c_addr,
.flags = I2C_M_RD,
- .len = sizeof(buf),
+ .len = len,
.buf = buf,
}
};
+ if (len > sizeof(buf)) {
+ dev_warn(&priv->i2c->dev,
+ "%s: i2c wr reg=%04x: len=%d is too big!\n",
+ KBUILD_MODNAME, reg, len);
+ return -EINVAL;
+ }
+
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);