Home Home > GIT Browse
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorZeng Zhaoming <zhaoming.zeng@freescale.com>2011-02-24 02:08:21 +0800
committerMark Brown <broonie@opensource.wolfsonmicro.com>2011-02-25 12:09:33 +0000
commit9b34e6cc3bc2bf826c078c93c81b46f6c08da25f (patch)
treedb46b5a8de5f6853133766d1eeb0acadb51df744
parentceade6c81bd913b23bffb3d80909ea430850c79b (diff)
ASoC: Add Freescale SGTL5000 codec support
Add Freescale SGTL5000 codec support. Supported features: - line-in and mic input - headphone and line-out output - line-in bypass ADC and DAC to headphone - 16, 20, 24, 32 bit audio - 8 ~ 96k sample rates Signed-off-by: Zeng Zhaoming <zhaoming.zeng@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-rw-r--r--sound/soc/codecs/Kconfig5
-rw-r--r--sound/soc/codecs/Makefile2
-rw-r--r--sound/soc/codecs/sgtl5000.c1512
-rw-r--r--sound/soc/codecs/sgtl5000.h402
4 files changed, 1921 insertions, 0 deletions
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index e239345a4d5d..c04da1871297 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -33,6 +33,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_MAX98088 if I2C
select SND_SOC_MAX9877 if I2C
select SND_SOC_PCM3008
+ select SND_SOC_SGTL5000 if I2C
select SND_SOC_SN95031 if INTEL_SCU_IPC
select SND_SOC_SPDIF
select SND_SOC_SSM2602 if I2C
@@ -182,6 +183,10 @@ config SND_SOC_MAX98088
config SND_SOC_PCM3008
tristate
+#Freescale sgtl5000 codec
+config SND_SOC_SGTL5000
+ tristate
+
config SND_SOC_SN95031
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ae10507dd2e1..3bbb08c512d0 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -19,6 +19,7 @@ snd-soc-dmic-objs := dmic.o
snd-soc-l3-objs := l3.o
snd-soc-max98088-objs := max98088.o
snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
snd-soc-sn95031-objs := sn95031.o
snd-soc-spdif-objs := spdif_transciever.o
@@ -103,6 +104,7 @@ obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o
obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o
obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
+obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o
obj-$(CONFIG_SND_SOC_SN95031) +=snd-soc-sn95031.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o
obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
new file mode 100644
index 000000000000..9eb206e852db
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.c
@@ -0,0 +1,1512 @@
+/*
+ * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <mach/hardware.h>
+
+#include "sgtl5000.h"
+
+#define SGTL5000_DAP_REG_OFFSET 0x0100
+#define SGTL5000_MAX_REG_OFFSET 0x013A
+
+/* default value of sgtl5000 registers except DAP */
+static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] = {
+ 0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */
+ 0x0000, /* 0x0002, CHIP_DIG_POWER. */
+ 0x0008, /* 0x0004, CHIP_CKL_CTRL */
+ 0x0010, /* 0x0006, CHIP_I2S_CTRL */
+ 0x0000, /* 0x0008, reserved */
+ 0x0008, /* 0x000A, CHIP_SSS_CTRL */
+ 0x0000, /* 0x000C, reserved */
+ 0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */
+ 0x3c3c, /* 0x0010, CHIP_DAC_VOL */
+ 0x0000, /* 0x0012, reserved */
+ 0x015f, /* 0x0014, CHIP_PAD_STRENGTH */
+ 0x0000, /* 0x0016, reserved */
+ 0x0000, /* 0x0018, reserved */
+ 0x0000, /* 0x001A, reserved */
+ 0x0000, /* 0x001E, reserved */
+ 0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */
+ 0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */
+ 0x0111, /* 0x0024, CHIP_ANN_CTRL */
+ 0x0000, /* 0x0026, CHIP_LINREG_CTRL */
+ 0x0000, /* 0x0028, CHIP_REF_CTRL */
+ 0x0000, /* 0x002A, CHIP_MIC_CTRL */
+ 0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */
+ 0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */
+ 0x7060, /* 0x0030, CHIP_ANA_POWER */
+ 0x5000, /* 0x0032, CHIP_PLL_CTRL */
+ 0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */
+ 0x0000, /* 0x0036, CHIP_ANA_STATUS */
+ 0x0000, /* 0x0038, reserved */
+ 0x0000, /* 0x003A, CHIP_ANA_TEST2 */
+ 0x0000, /* 0x003C, CHIP_SHORT_CTRL */
+ 0x0000, /* reserved */
+};
+
+/* default value of dap registers */
+static const u16 sgtl5000_dap_regs[] = {
+ 0x0000, /* 0x0100, DAP_CONTROL */
+ 0x0000, /* 0x0102, DAP_PEQ */
+ 0x0040, /* 0x0104, DAP_BASS_ENHANCE */
+ 0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */
+ 0x0000, /* 0x0108, DAP_AUDIO_EQ */
+ 0x0040, /* 0x010A, DAP_SGTL_SURROUND */
+ 0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */
+ 0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */
+ 0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */
+ 0x0000, /* 0x0112, reserved */
+ 0x0000, /* 0x0114, reserved */
+ 0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */
+ 0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */
+ 0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */
+ 0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */
+ 0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */
+ 0x8000, /* 0x0120, DAP_MAIN_CHAN */
+ 0x0000, /* 0x0122, DAP_MIX_CHAN */
+ 0x0510, /* 0x0124, DAP_AVC_CTRL */
+ 0x1473, /* 0x0126, DAP_AVC_THRESHOLD */
+ 0x0028, /* 0x0128, DAP_AVC_ATTACK */
+ 0x0050, /* 0x012A, DAP_AVC_DECAY */
+ 0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */
+ 0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */
+ 0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */
+ 0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */
+ 0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */
+ 0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */
+ 0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */
+ 0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */
+};
+
+/* regulator supplies for sgtl5000, VDDD is an optional external supply */
+enum sgtl5000_regulator_supplies {
+ VDDA,
+ VDDIO,
+ VDDD,
+ SGTL5000_SUPPLY_NUM
+};
+
+/* vddd is optional supply */
+static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
+ "VDDA",
+ "VDDIO",
+ "VDDD"
+};
+
+#define LDO_CONSUMER_NAME "VDDD_LDO"
+#define LDO_VOLTAGE 1200000
+
+static struct regulator_consumer_supply ldo_consumer[] = {
+ REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
+};
+
+struct regulator_init_data ldo_init_data = {
+ .constraints = {
+ .min_uV = 850000,
+ .max_uV = 1600000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldo_consumer[0],
+};
+
+/*
+ * sgtl5000 internal ldo regulator,
+ * enabled when VDDD not provided
+ */
+struct ldo_regulator {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+ int voltage;
+ void *codec_data;
+ bool enabled;
+};
+
+/* sgtl5000 private structure in codec */
+struct sgtl5000_priv {
+ int sysclk; /* sysclk rate */
+ int master; /* i2s master or not */
+ int fmt; /* i2s data format */
+ struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
+ struct ldo_regulator *ldo;
+};
+
+/*
+ * mic_bias power on/off share the same register bits with
+ * output impedance of mic bias, when power on mic bias, we
+ * need reclaim it to impedance value.
+ * 0x0 = Powered off
+ * 0x1 = 2Kohm
+ * 0x2 = 4Kohm
+ * 0x3 = 8Kohm
+ */
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ /* change mic bias resistor to 4Kohm */
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ /*
+ * SGTL5000_BIAS_R_8k as mask to clean the two bits
+ * of mic bias and output impedance
+ */
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_8k, 0);
+ break;
+ }
+ return 0;
+}
+
+/*
+ * using codec assist to small pop, hp_powerup or lineout_powerup
+ * should stay setting until vag_powerup is fully ramped down,
+ * vag fully ramped down require 400ms.
+ */
+static int small_pop_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, 0);
+ msleep(400);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* input sources for ADC */
+static const char *adc_mux_text[] = {
+ "MIC_IN", "LINE_IN"
+};
+
+static const struct soc_enum adc_enum =
+SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
+
+static const struct snd_kcontrol_new adc_mux =
+SOC_DAPM_ENUM("Capture Mux", adc_enum);
+
+/* input sources for DAC */
+static const char *dac_mux_text[] = {
+ "DAC", "LINE_IN"
+};
+
+static const struct soc_enum dac_enum =
+SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
+
+static const struct snd_kcontrol_new dac_mux =
+SOC_DAPM_ENUM("Headphone Mux", dac_enum);
+
+static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
+ SND_SOC_DAPM_INPUT("LINE_IN"),
+ SND_SOC_DAPM_INPUT("MIC_IN"),
+
+ SND_SOC_DAPM_OUTPUT("HP_OUT"),
+ SND_SOC_DAPM_OUTPUT("LINE_OUT"),
+
+ SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
+ mic_bias_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+ SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+ small_pop_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PGA_E("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0,
+ small_pop_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+
+ SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
+ SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
+
+ /* aif for i2s input */
+ SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
+ 0, SGTL5000_CHIP_DIG_POWER,
+ 0, 0),
+
+ /* aif for i2s output */
+ SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
+ 0, SGTL5000_CHIP_DIG_POWER,
+ 1, 0),
+
+ SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
+
+ SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
+};
+
+/* routes for sgtl5000 */
+static const struct snd_soc_dapm_route audio_map[] = {
+ {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
+ {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
+
+ {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
+ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
+
+ {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
+ {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
+ {"LO", NULL, "DAC"}, /* dac --> line_out */
+
+ {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
+ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
+
+ {"LINE_OUT", NULL, "LO"},
+ {"HP_OUT", NULL, "HP"},
+};
+
+/* custom function to fetch info of PCM playback volume */
+static int dac_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 0xfc - 0x3c;
+ return 0;
+}
+
+/*
+ * custom function to get of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ * -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * register value map to userspace value
+ *
+ * register value 0x3c(0dB) 0xf0(-90dB)0xfc
+ * ------------------------------
+ * userspace value 0xc0 0
+ */
+static int dac_get_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int reg;
+ int l;
+ int r;
+
+ reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
+
+ /* get left channel volume */
+ l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
+
+ /* get right channel volume */
+ r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+ /* make sure value fall in (0x3c,0xfc) */
+ l = clamp(l, 0x3c, 0xfc);
+ r = clamp(r, 0x3c, 0xfc);
+
+ /* invert it and map to userspace value */
+ l = 0xfc - l;
+ r = 0xfc - r;
+
+ ucontrol->value.integer.value[0] = l;
+ ucontrol->value.integer.value[1] = r;
+
+ return 0;
+}
+
+/*
+ * custom function to put of PCM playback volume
+ *
+ * dac volume register
+ * 15-------------8-7--------------0
+ * | R channel vol | L channel vol |
+ * -------------------------------
+ *
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ *
+ * register values map to dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ *
+ * userspace value map to register value
+ *
+ * userspace value 0xc0 0
+ * ------------------------------
+ * register value 0x3c(0dB) 0xf0(-90dB)0xfc
+ */
+static int dac_put_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int reg;
+ int l;
+ int r;
+
+ l = ucontrol->value.integer.value[0];
+ r = ucontrol->value.integer.value[1];
+
+ /* make sure userspace volume fall in (0, 0xfc-0x3c) */
+ l = clamp(l, 0, 0xfc - 0x3c);
+ r = clamp(r, 0, 0xfc - 0x3c);
+
+ /* invert it, get the value can be set to register */
+ l = 0xfc - l;
+ r = 0xfc - r;
+
+ /* shift to get the register value */
+ reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
+ r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+ snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
+
+ return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
+
+/* tlv for mic gain, 0db 20db 30db 40db */
+static const unsigned int mic_gain_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
+};
+
+/* tlv for hp volume, -51.5db to 12.0db, step .5db */
+static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
+
+static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
+ /* SOC_DOUBLE_S8_TLV with invert */
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "PCM Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .info = dac_info_volsw,
+ .get = dac_get_volsw,
+ .put = dac_put_volsw,
+ },
+
+ SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
+ SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
+ SGTL5000_CHIP_ANA_ADC_CTRL,
+ 8, 2, 0, capture_6db_attenuate),
+ SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
+
+ SOC_DOUBLE_TLV("Headphone Playback Volume",
+ SGTL5000_CHIP_ANA_HP_CTRL,
+ 0, 8,
+ 0x7f, 1,
+ headphone_volume),
+ SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
+ 5, 1, 0),
+
+ SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
+ 0, 4, 0, mic_gain_tlv),
+};
+
+/* mute the codec used by alsa core */
+static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ adcdac_ctrl, mute ? adcdac_ctrl : 0);
+
+ return 0;
+}
+
+/* set codec format */
+static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ u16 i2sctl = 0;
+
+ sgtl5000->master = 0;
+ /*
+ * i2s clock and frame master setting.
+ * ONLY support:
+ * - clock and frame slave,
+ * - clock and frame master
+ */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ i2sctl |= SGTL5000_I2S_MASTER;
+ sgtl5000->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* setting i2s data format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ i2sctl |= SGTL5000_I2S_MODE_PCM;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ i2sctl |= SGTL5000_I2S_MODE_PCM;
+ i2sctl |= SGTL5000_I2S_LRALIGN;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ i2sctl |= SGTL5000_I2S_MODE_RJ;
+ i2sctl |= SGTL5000_I2S_LRPOL;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
+ i2sctl |= SGTL5000_I2S_LRALIGN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+ /* Clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ i2sctl |= SGTL5000_I2S_SCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
+
+ return 0;
+}
+
+/* set codec sysclk */
+static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (clk_id) {
+ case SGTL5000_SYSCLK:
+ sgtl5000->sysclk = freq;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * set clock according to i2s frame clock,
+ * sgtl5000 provide 2 clock sources.
+ * 1. sys_mclk. sample freq can only configure to
+ * 1/256, 1/384, 1/512 of sys_mclk.
+ * 2. pll. can derive any audio clocks.
+ *
+ * clock setting rules:
+ * 1. in slave mode, only sys_mclk can use.
+ * 2. as constraint by sys_mclk, sample freq should
+ * set to 32k, 44.1k and above.
+ * 3. using sys_mclk prefer to pll to save power.
+ */
+static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int clk_ctl = 0;
+ int sys_fs; /* sample freq */
+
+ /*
+ * sample freq should be divided by frame clock,
+ * if frame clock lower than 44.1khz, sample feq should set to
+ * 32khz or 44.1khz.
+ */
+ switch (frame_rate) {
+ case 8000:
+ case 16000:
+ sys_fs = 32000;
+ break;
+ case 11025:
+ case 22050:
+ sys_fs = 44100;
+ break;
+ default:
+ sys_fs = frame_rate;
+ break;
+ }
+
+ /* set divided factor of frame clock */
+ switch (sys_fs / frame_rate) {
+ case 4:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ case 2:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ case 1:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set the sys_fs according to frame rate */
+ switch (sys_fs) {
+ case 32000:
+ clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 44100:
+ clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 48000:
+ clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 96000:
+ clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ default:
+ dev_err(codec->dev, "frame rate %d not supported\n",
+ frame_rate);
+ return -EINVAL;
+ }
+
+ /*
+ * calculate the divider of mclk/sample_freq,
+ * factor of freq =96k can only be 256, since mclk in range (12m,27m)
+ */
+ switch (sgtl5000->sysclk / sys_fs) {
+ case 256:
+ clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ break;
+ case 384:
+ clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ break;
+ case 512:
+ clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ break;
+ default:
+ /* if mclk not satisify the divider, use pll */
+ if (sgtl5000->master) {
+ clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ } else {
+ dev_err(codec->dev,
+ "PLL not supported in slave mode\n");
+ return -EINVAL;
+ }
+ }
+
+ /* if using pll, please check manual 6.4.2 for detail */
+ if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
+ u64 out, t;
+ int div2;
+ int pll_ctl;
+ unsigned int in, int_div, frac_div;
+
+ if (sgtl5000->sysclk > 17000000) {
+ div2 = 1;
+ in = sgtl5000->sysclk / 2;
+ } else {
+ div2 = 0;
+ in = sgtl5000->sysclk;
+ }
+ if (sys_fs == 44100)
+ out = 180633600;
+ else
+ out = 196608000;
+ t = do_div(out, in);
+ int_div = out;
+ t *= 2048;
+ do_div(t, in);
+ frac_div = t;
+ pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
+ frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
+
+ snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
+ if (div2)
+ snd_soc_update_bits(codec,
+ SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INPUT_FREQ_DIV2,
+ SGTL5000_INPUT_FREQ_DIV2);
+ else
+ snd_soc_update_bits(codec,
+ SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INPUT_FREQ_DIV2,
+ 0);
+
+ /* power up pll */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
+ } else {
+ /* power down pll */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+ 0);
+ }
+
+ /* if using pll, clk_ctrl must be set after pll power up */
+ snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+
+ return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ * input: params_rate, params_fmt
+ */
+static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int channels = params_channels(params);
+ int i2s_ctl = 0;
+ int stereo;
+ int ret;
+
+ /* sysclk should already set */
+ if (!sgtl5000->sysclk) {
+ dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
+ return -EFAULT;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ stereo = SGTL5000_DAC_STEREO;
+ else
+ stereo = SGTL5000_ADC_STEREO;
+
+ /* set mono to save power */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
+ channels == 1 ? 0 : stereo);
+
+ /* set codec clock base on lrclk */
+ ret = sgtl5000_set_clock(codec, params_rate(params));
+ if (ret)
+ return ret;
+
+ /* set i2s data format */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+ return -EINVAL;
+ i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+ return -EINVAL;
+ i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl);
+
+ return 0;
+}
+
+static int ldo_regulator_is_enabled(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+
+ return ldo->enabled;
+}
+
+static int ldo_regulator_enable(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+ struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
+ int reg;
+
+ if (ldo_regulator_is_enabled(dev))
+ return 0;
+
+ /* set regulator value firstly */
+ reg = (1600 - ldo->voltage / 1000) / 50;
+ reg = clamp(reg, 0x0, 0xf);
+
+ /* amend the voltage value, unit: uV */
+ ldo->voltage = (1600 - reg * 50) * 1000;
+
+ /* set voltage to register */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+ (0x1 << 4) - 1, reg);
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINEREG_D_POWERUP,
+ SGTL5000_LINEREG_D_POWERUP);
+
+ /* when internal ldo enabled, simple digital power can be disabled */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP,
+ 0);
+
+ ldo->enabled = 1;
+ return 0;
+}
+
+static int ldo_regulator_disable(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+ struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINEREG_D_POWERUP,
+ 0);
+
+ /* clear voltage info */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+ (0x1 << 4) - 1, 0);
+
+ ldo->enabled = 0;
+
+ return 0;
+}
+
+static int ldo_regulator_get_voltage(struct regulator_dev *dev)
+{
+ struct ldo_regulator *ldo = rdev_get_drvdata(dev);
+
+ return ldo->voltage;
+}
+
+static struct regulator_ops ldo_regulator_ops = {
+ .is_enabled = ldo_regulator_is_enabled,
+ .enable = ldo_regulator_enable,
+ .disable = ldo_regulator_disable,
+ .get_voltage = ldo_regulator_get_voltage,
+};
+
+static int ldo_regulator_register(struct snd_soc_codec *codec,
+ struct regulator_init_data *init_data,
+ int voltage)
+{
+ struct ldo_regulator *ldo;
+
+ ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
+
+ if (!ldo) {
+ dev_err(codec->dev, "failed to allocate ldo_regulator\n");
+ return -ENOMEM;
+ }
+
+ ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
+ if (!ldo->desc.name) {
+ kfree(ldo);
+ dev_err(codec->dev, "failed to allocate decs name memory\n");
+ return -ENOMEM;
+ }
+
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.owner = THIS_MODULE;
+ ldo->desc.ops = &ldo_regulator_ops;
+ ldo->desc.n_voltages = 1;
+
+ ldo->codec_data = codec;
+ ldo->voltage = voltage;
+
+ ldo->dev = regulator_register(&ldo->desc, codec->dev,
+ init_data, ldo);
+ if (IS_ERR(ldo->dev)) {
+ dev_err(codec->dev, "failed to register regulator\n");
+ kfree(ldo->desc.name);
+ kfree(ldo);
+
+ return PTR_ERR(ldo->dev);
+ }
+
+ return 0;
+}
+
+static int ldo_regulator_remove(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ struct ldo_regulator *ldo = sgtl5000->ldo;
+
+ if (!ldo)
+ return 0;
+
+ regulator_unregister(ldo->dev);
+ kfree(ldo->desc.name);
+ kfree(ldo);
+
+ return 0;
+}
+
+/*
+ * set dac bias
+ * common state changes:
+ * startup:
+ * off --> standby --> prepare --> on
+ * standby --> prepare --> on
+ *
+ * stop:
+ * on --> prepare --> standby
+ */
+static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ int ret;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(
+ ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret)
+ return ret;
+ udelay(10);
+ }
+
+ break;
+ case SND_SOC_BIAS_OFF:
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ break;
+ }
+
+ codec->dapm.bias_level = level;
+ return 0;
+}
+
+#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE |\
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai_ops sgtl5000_ops = {
+ .hw_params = sgtl5000_pcm_hw_params,
+ .digital_mute = sgtl5000_digital_mute,
+ .set_fmt = sgtl5000_set_dai_fmt,
+ .set_sysclk = sgtl5000_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver sgtl5000_dai = {
+ .name = "sgtl5000",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ /*
+ * only support 8~48K + 96K,
+ * TODO modify hw_param to support more
+ */
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+ .formats = SGTL5000_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+ .formats = SGTL5000_FORMATS,
+ },
+ .ops = &sgtl5000_ops,
+ .symmetric_rates = 1,
+};
+
+static int sgtl5000_volatile_register(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ switch (reg) {
+ case SGTL5000_CHIP_ID:
+ case SGTL5000_CHIP_ADCDAC_CTRL:
+ case SGTL5000_CHIP_ANA_STATUS:
+ return 1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SUSPEND
+static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
+{
+ sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+/*
+ * restore all sgtl5000 registers,
+ * since a big hole between dap and regular registers,
+ * we will restore them respectively.
+ */
+static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
+{
+ u16 *cache = codec->reg_cache;
+ int i;
+ int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1;
+
+ /* restore regular registers */
+ for (i = 0; i < regular_regs; i++) {
+ int reg = i << 1;
+
+ /* this regs depends on the others */
+ if (reg == SGTL5000_CHIP_ANA_POWER ||
+ reg == SGTL5000_CHIP_CLK_CTRL ||
+ reg == SGTL5000_CHIP_LINREG_CTRL ||
+ reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
+ reg == SGTL5000_CHIP_CLK_CTRL)
+ continue;
+
+ snd_soc_write(codec, reg, cache[i]);
+ }
+
+ /* restore dap registers */
+ for (i = SGTL5000_DAP_REG_OFFSET >> 1;
+ i < SGTL5000_MAX_REG_OFFSET >> 1; i++) {
+ int reg = i << 1;
+
+ snd_soc_write(codec, reg, cache[i]);
+ }
+
+ /*
+ * restore power and other regs according
+ * to set_power() and set_clock()
+ */
+ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
+ cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
+ cache[SGTL5000_CHIP_ANA_POWER >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
+ cache[SGTL5000_CHIP_CLK_CTRL >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
+ cache[SGTL5000_CHIP_REF_CTRL >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+ cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]);
+ return 0;
+}
+
+static int sgtl5000_resume(struct snd_soc_codec *codec)
+{
+ /* Bring the codec back up to standby to enable regulators */
+ sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Restore registers by cached in memory */
+ sgtl5000_restore_regs(codec);
+ return 0;
+}
+#else
+#define sgtl5000_suspend NULL
+#define sgtl5000_resume NULL
+#endif /* CONFIG_SUSPEND */
+
+/*
+ * sgtl5000 has 3 internal power supplies:
+ * 1. VAG, normally set to vdda/2
+ * 2. chargepump, set to different value
+ * according to voltage of vdda and vddio
+ * 3. line out VAG, normally set to vddio/2
+ *
+ * and should be set according to:
+ * 1. vddd provided by external or not
+ * 2. vdda and vddio voltage value. > 3.1v or not
+ * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
+ */
+static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
+{
+ int vddd;
+ int vdda;
+ int vddio;
+ u16 ana_pwr;
+ u16 lreg_ctrl;
+ int vag;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
+ vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
+ vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
+
+ vdda = vdda / 1000;
+ vddio = vddio / 1000;
+ vddd = vddd / 1000;
+
+ if (vdda <= 0 || vddio <= 0 || vddd < 0) {
+ dev_err(codec->dev, "regulator voltage not set correctly\n");
+
+ return -EINVAL;
+ }
+
+ /* according to datasheet, maximum voltage of supplies */
+ if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
+ dev_err(codec->dev,
+ "exceed max voltage vdda %dmv vddio %dma vddd %dma\n",
+ vdda, vddio, vddd);
+
+ return -EINVAL;
+ }
+
+ /* reset value */
+ ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
+ ana_pwr |= SGTL5000_DAC_STEREO |
+ SGTL5000_ADC_STEREO |
+ SGTL5000_REFTOP_POWERUP;
+ lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
+
+ if (vddio < 3100 && vdda < 3100) {
+ /* enable internal oscillator used for charge pump */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INT_OSC_EN,
+ SGTL5000_INT_OSC_EN);
+ /* Enable VDDC charge pump */
+ ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
+ } else if (vddio >= 3100 && vdda >= 3100) {
+ /*
+ * if vddio and vddd > 3.1v,
+ * charge pump should be clean before set ana_pwr
+ */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
+
+ /* VDDC use VDDIO rail */
+ lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+ lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+ SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ }
+
+ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+
+ /* set voltage to register */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
+ (0x1 << 4) - 1, 0x8);
+
+ /*
+ * if vddd linear reg has been enabled,
+ * simple digital supply should be clear to get
+ * proper VDDD voltage.
+ */
+ if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP,
+ 0);
+ else
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP |
+ SGTL5000_STARTUP_POWERUP,
+ 0);
+
+ /*
+ * set ADC/DAC VAG to vdda / 2,
+ * should stay in range (0.8v, 1.575v)
+ */
+ vag = vdda / 2;
+ if (vag <= SGTL5000_ANA_GND_BASE)
+ vag = 0;
+ else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
+ (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
+ vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
+ else
+ vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ vag << SGTL5000_ANA_GND_SHIFT,
+ vag << SGTL5000_ANA_GND_SHIFT);
+
+ /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
+ vag = vddio / 2;
+ if (vag <= SGTL5000_LINE_OUT_GND_BASE)
+ vag = 0;
+ else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+ SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
+ vag = SGTL5000_LINE_OUT_GND_MAX;
+ else
+ vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+ SGTL5000_LINE_OUT_GND_STP;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+ vag << SGTL5000_LINE_OUT_GND_SHIFT |
+ SGTL5000_LINE_OUT_CURRENT_360u <<
+ SGTL5000_LINE_OUT_CURRENT_SHIFT,
+ vag << SGTL5000_LINE_OUT_GND_SHIFT |
+ SGTL5000_LINE_OUT_CURRENT_360u <<
+ SGTL5000_LINE_OUT_CURRENT_SHIFT);
+
+ return 0;
+}
+
+static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
+{
+ u16 reg;
+ int ret;
+ int rev;
+ int i;
+ int external_vddd = 0;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
+ sgtl5000->supplies[i].supply = supply_names[i];
+
+ ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (!ret)
+ external_vddd = 1;
+ else {
+ /* set internal ldo to 1.2v */
+ int voltage = LDO_VOLTAGE;
+
+ ret = ldo_regulator_register(codec, &ldo_init_data, voltage);
+ if (ret) {
+ dev_err(codec->dev,
+ "Failed to register vddd internal supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
+
+ ret = regulator_bulk_get(codec->dev,
+ ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+
+ if (ret) {
+ ldo_regulator_remove(codec);
+ dev_err(codec->dev,
+ "Failed to request supplies: %d\n", ret);
+
+ return ret;
+ }
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret)
+ goto err_regulator_free;
+
+ /* wait for all power rails bring up */
+ udelay(10);
+
+ /* read chip information */
+ reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
+ if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
+ SGTL5000_PARTID_PART_ID) {
+ dev_err(codec->dev,
+ "Device with ID register %x is not a sgtl5000\n", reg);
+ ret = -ENODEV;
+ goto err_regulator_disable;
+ }
+
+ rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+ dev_info(codec->dev, "sgtl5000 revision %d\n", rev);
+
+ /*
+ * workaround for revision 0x11 and later,
+ * roll back to use internal LDO
+ */
+ if (external_vddd && rev >= 0x11) {
+ int voltage = LDO_VOLTAGE;
+ /* disable all regulator first */
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ /* free VDDD regulator */
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+
+ ret = ldo_regulator_register(codec, &ldo_init_data, voltage);
+ if (ret)
+ return ret;
+
+ sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
+
+ ret = regulator_bulk_get(codec->dev,
+ ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret) {
+ ldo_regulator_remove(codec);
+ dev_err(codec->dev,
+ "Failed to request supplies: %d\n", ret);
+
+ return ret;
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (ret)
+ goto err_regulator_free;
+
+ /* wait for all power rails bring up */
+ udelay(10);
+ }
+
+ return 0;
+
+err_regulator_disable:
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+err_regulator_free:
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ if (external_vddd)
+ ldo_regulator_remove(codec);
+ return ret;
+
+}
+
+static int sgtl5000_probe(struct snd_soc_codec *codec)
+{
+ int ret;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ /* setup i2c data ops */
+ ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ ret = sgtl5000_enable_regulators(codec);
+ if (ret)
+ return ret;
+
+ /* power up sgtl5000 */
+ ret = sgtl5000_set_power_regs(codec);
+ if (ret)
+ goto err;
+
+ /* enable small pop, introduce 400ms delay in turning off */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ SGTL5000_SMALL_POP,
+ SGTL5000_SMALL_POP);
+
+ /* disable short cut detector */
+ snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
+
+ /*
+ * set i2s as default input of sound switch
+ * TODO: add sound switch to control and dapm widge.
+ */
+ snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
+ SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
+ snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
+ SGTL5000_ADC_EN | SGTL5000_DAC_EN);
+
+ /* enable dac volume ramp by default */
+ snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ SGTL5000_DAC_VOL_RAMP_EN |
+ SGTL5000_DAC_MUTE_RIGHT |
+ SGTL5000_DAC_MUTE_LEFT);
+
+ snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_HP_ZCD_EN |
+ SGTL5000_ADC_ZCD_EN);
+
+ snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0);
+
+ /*
+ * disable DAP
+ * TODO:
+ * Enable DAP in kcontrol and dapm.
+ */
+ snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
+
+ /* leading to standby state */
+ ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ if (ret)
+ goto err;
+
+ snd_soc_add_controls(codec, sgtl5000_snd_controls,
+ ARRAY_SIZE(sgtl5000_snd_controls));
+
+ snd_soc_dapm_new_controls(&codec->dapm, sgtl5000_dapm_widgets,
+ ARRAY_SIZE(sgtl5000_dapm_widgets));
+
+ snd_soc_dapm_add_routes(&codec->dapm, audio_map,
+ ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_new_widgets(&codec->dapm);
+
+ return 0;
+
+err:
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ ldo_regulator_remove(codec);
+
+ return ret;
+}
+
+static int sgtl5000_remove(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
+ sgtl5000->supplies);
+ ldo_regulator_remove(codec);
+
+ return 0;
+}
+
+struct snd_soc_codec_driver sgtl5000_driver = {
+ .probe = sgtl5000_probe,
+ .remove = sgtl5000_remove,
+ .suspend = sgtl5000_suspend,
+ .resume = sgtl5000_resume,
+ .set_bias_level = sgtl5000_set_bias_level,
+ .reg_cache_size = ARRAY_SIZE(sgtl5000_regs),
+ .reg_word_size = sizeof(u16),
+ .reg_cache_step = 2,
+ .reg_cache_default = sgtl5000_regs,
+ .volatile_register = sgtl5000_volatile_register,
+};
+
+static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sgtl5000_priv *sgtl5000;
+ int ret;
+
+ sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL);
+ if (!sgtl5000)
+ return -ENOMEM;
+
+ /*
+ * copy DAP default values to default value array.
+ * sgtl5000 register space has a big hole, merge it
+ * at init phase makes life easy.
+ * FIXME: should we drop 'const' of sgtl5000_regs?
+ */
+ memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)),
+ sgtl5000_dap_regs,
+ SGTL5000_MAX_REG_OFFSET - SGTL5000_DAP_REG_OFFSET);
+
+ i2c_set_clientdata(client, sgtl5000);
+
+ ret = snd_soc_register_codec(&client->dev,
+ &sgtl5000_driver, &sgtl5000_dai, 1);
+ if (ret) {
+ dev_err(&client->dev, "Failed to register codec: %d\n", ret);
+ kfree(sgtl5000);
+ return ret;
+ }
+
+ return 0;
+}
+
+static __devexit int sgtl5000_i2c_remove(struct i2c_client *client)
+{
+ struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&client->dev);
+
+ kfree(sgtl5000);
+ return 0;
+}
+
+static const struct i2c_device_id sgtl5000_id[] = {
+ {"sgtl5000", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
+
+static struct i2c_driver sgtl5000_i2c_driver = {
+ .driver = {
+ .name = "sgtl5000",
+ .owner = THIS_MODULE,
+ },
+ .probe = sgtl5000_i2c_probe,
+ .remove = __devexit_p(sgtl5000_i2c_remove),
+ .id_table = sgtl5000_id,
+};
+
+static int __init sgtl5000_modinit(void)
+{
+ return i2c_add_driver(&sgtl5000_i2c_driver);
+}
+module_init(sgtl5000_modinit);
+
+static void __exit sgtl5000_exit(void)
+{
+ i2c_del_driver(&sgtl5000_i2c_driver);
+}
+module_exit(sgtl5000_exit);
+
+MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
+MODULE_AUTHOR("Zeng Zhaoming <zhaoming.zeng@freescale.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
new file mode 100644
index 000000000000..c29312ab8016
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.h
@@ -0,0 +1,402 @@
+/*
+ * sgtl5000.h - SGTL5000 audio codec interface
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _SGTL5000_H
+#define _SGTL5000_H
+
+#include <linux/i2c.h>
+
+/*
+ * Register values.
+ */
+#define SGTL5000_CHIP_ID 0x0000
+#define SGTL5000_CHIP_DIG_POWER 0x0002
+#define SGTL5000_CHIP_CLK_CTRL 0x0004
+#define SGTL5000_CHIP_I2S_CTRL 0x0006
+#define SGTL5000_CHIP_SSS_CTRL 0x000a
+#define SGTL5000_CHIP_ADCDAC_CTRL 0x000e
+#define SGTL5000_CHIP_DAC_VOL 0x0010
+#define SGTL5000_CHIP_PAD_STRENGTH 0x0014
+#define SGTL5000_CHIP_ANA_ADC_CTRL 0x0020
+#define SGTL5000_CHIP_ANA_HP_CTRL 0x0022
+#define SGTL5000_CHIP_ANA_CTRL 0x0024
+#define SGTL5000_CHIP_LINREG_CTRL 0x0026
+#define SGTL5000_CHIP_REF_CTRL 0x0028
+#define SGTL5000_CHIP_MIC_CTRL 0x002a
+#define SGTL5000_CHIP_LINE_OUT_CTRL 0x002c
+#define SGTL5000_CHIP_LINE_OUT_VOL 0x002e
+#define SGTL5000_CHIP_ANA_POWER 0x0030
+#define SGTL5000_CHIP_PLL_CTRL 0x0032
+#define SGTL5000_CHIP_CLK_TOP_CTRL 0x0034
+#define SGTL5000_CHIP_ANA_STATUS 0x0036
+#define SGTL5000_CHIP_SHORT_CTRL 0x003c
+#define SGTL5000_CHIP_ANA_TEST2 0x003a
+#define SGTL5000_DAP_CTRL 0x0100
+#define SGTL5000_DAP_PEQ 0x0102
+#define SGTL5000_DAP_BASS_ENHANCE 0x0104
+#define SGTL5000_DAP_BASS_ENHANCE_CTRL 0x0106
+#define SGTL5000_DAP_AUDIO_EQ 0x0108
+#define SGTL5000_DAP_SURROUND 0x010a
+#define SGTL5000_DAP_FLT_COEF_ACCESS 0x010c
+#define SGTL5000_DAP_COEF_WR_B0_MSB 0x010e
+#define SGTL5000_DAP_COEF_WR_B0_LSB 0x0110
+#define SGTL5000_DAP_EQ_BASS_BAND0 0x0116
+#define SGTL5000_DAP_EQ_BASS_BAND1 0x0118
+#define SGTL5000_DAP_EQ_BASS_BAND2 0x011a
+#define SGTL5000_DAP_EQ_BASS_BAND3 0x011c
+#define SGTL5000_DAP_EQ_BASS_BAND4 0x011e
+#define SGTL5000_DAP_MAIN_CHAN 0x0120
+#define SGTL5000_DAP_MIX_CHAN 0x0122
+#define SGTL5000_DAP_AVC_CTRL 0x0124
+#define SGTL5000_DAP_AVC_THRESHOLD 0x0126
+#define SGTL5000_DAP_AVC_ATTACK 0x0128
+#define SGTL5000_DAP_AVC_DECAY 0x012a
+#define SGTL5000_DAP_COEF_WR_B1_MSB 0x012c
+#define SGTL5000_DAP_COEF_WR_B1_LSB 0x012e
+#define SGTL5000_DAP_COEF_WR_B2_MSB 0x0130
+#define SGTL5000_DAP_COEF_WR_B2_LSB 0x0132
+#define SGTL5000_DAP_COEF_WR_A1_MSB 0x0134
+#define SGTL5000_DAP_COEF_WR_A1_LSB 0x0136
+#define SGTL5000_DAP_COEF_WR_A2_MSB 0x0138
+#define SGTL5000_DAP_COEF_WR_A2_LSB 0x013a
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * SGTL5000_CHIP_ID
+ */
+#define SGTL5000_PARTID_MASK 0xff00
+#define SGTL5000_PARTID_SHIFT 8
+#define SGTL5000_PARTID_WIDTH 8
+#define SGTL5000_PARTID_PART_ID 0xa0
+#define SGTL5000_REVID_MASK 0x00ff
+#define SGTL5000_REVID_SHIFT 0
+#define SGTL5000_REVID_WIDTH 8
+
+/*
+ * SGTL5000_CHIP_DIG_POWER
+ */
+#define SGTL5000_ADC_EN 0x0040
+#define SGTL5000_DAC_EN 0x0020
+#define SGTL5000_DAP_POWERUP 0x0010
+#define SGTL5000_I2S_OUT_POWERUP 0x0002
+#define SGTL5000_I2S_IN_POWERUP 0x0001
+
+/*
+ * SGTL5000_CHIP_CLK_CTRL
+ */
+#define SGTL5000_RATE_MODE_MASK 0x0030
+#define SGTL5000_RATE_MODE_SHIFT 4
+#define SGTL5000_RATE_MODE_WIDTH 2
+#define SGTL5000_RATE_MODE_DIV_1 0
+#define SGTL5000_RATE_MODE_DIV_2 1
+#define SGTL5000_RATE_MODE_DIV_4 2
+#define SGTL5000_RATE_MODE_DIV_6 3
+#define SGTL5000_SYS_FS_MASK 0x000c
+#define SGTL5000_SYS_FS_SHIFT 2
+#define SGTL5000_SYS_FS_WIDTH 2
+#define SGTL5000_SYS_FS_32k 0x0
+#define SGTL5000_SYS_FS_44_1k 0x1
+#define SGTL5000_SYS_FS_48k 0x2
+#define SGTL5000_SYS_FS_96k 0x3
+#define SGTL5000_MCLK_FREQ_MASK 0x0003
+#define SGTL5000_MCLK_FREQ_SHIFT 0
+#define SGTL5000_MCLK_FREQ_WIDTH 2
+#define SGTL5000_MCLK_FREQ_256FS 0x0
+#define SGTL5000_MCLK_FREQ_384FS 0x1
+#define SGTL5000_MCLK_FREQ_512FS 0x2
+#define SGTL5000_MCLK_FREQ_PLL 0x3
+
+/*
+ * SGTL5000_CHIP_I2S_CTRL
+ */
+#define SGTL5000_I2S_SCLKFREQ_MASK 0x0100
+#define SGTL5000_I2S_SCLKFREQ_SHIFT 8
+#define SGTL5000_I2S_SCLKFREQ_WIDTH 1
+#define SGTL5000_I2S_SCLKFREQ_64FS 0x0
+#define SGTL5000_I2S_SCLKFREQ_32FS 0x1 /* Not for RJ mode */
+#define SGTL5000_I2S_MASTER 0x0080
+#define SGTL5000_I2S_SCLK_INV 0x0040
+#define SGTL5000_I2S_DLEN_MASK 0x0030
+#define SGTL5000_I2S_DLEN_SHIFT 4
+#define SGTL5000_I2S_DLEN_WIDTH 2
+#define SGTL5000_I2S_DLEN_32 0x0
+#define SGTL5000_I2S_DLEN_24 0x1
+#define SGTL5000_I2S_DLEN_20 0x2
+#define SGTL5000_I2S_DLEN_16 0x3
+#define SGTL5000_I2S_MODE_MASK 0x000c
+#define SGTL5000_I2S_MODE_SHIFT 2
+#define SGTL5000_I2S_MODE_WIDTH 2
+#define SGTL5000_I2S_MODE_I2S_LJ 0x0
+#define SGTL5000_I2S_MODE_RJ 0x1
+#define SGTL5000_I2S_MODE_PCM 0x2
+#define SGTL5000_I2S_LRALIGN 0x0002
+#define SGTL5000_I2S_LRPOL 0x0001 /* set for which mode */
+
+/*
+ * SGTL5000_CHIP_SSS_CTRL
+ */
+#define SGTL5000_DAP_MIX_LRSWAP 0x4000
+#define SGTL5000_DAP_LRSWAP 0x2000
+#define SGTL5000_DAC_LRSWAP 0x1000
+#define SGTL5000_I2S_OUT_LRSWAP 0x0400
+#define SGTL5000_DAP_MIX_SEL_MASK 0x0300
+#define SGTL5000_DAP_MIX_SEL_SHIFT 8
+#define SGTL5000_DAP_MIX_SEL_WIDTH 2
+#define SGTL5000_DAP_MIX_SEL_ADC 0x0
+#define SGTL5000_DAP_MIX_SEL_I2S_IN 0x1
+#define SGTL5000_DAP_SEL_MASK 0x00c0
+#define SGTL5000_DAP_SEL_SHIFT 6
+#define SGTL5000_DAP_SEL_WIDTH 2
+#define SGTL5000_DAP_SEL_ADC 0x0
+#define SGTL5000_DAP_SEL_I2S_IN 0x1
+#define SGTL5000_DAC_SEL_MASK 0x0030
+#define SGTL5000_DAC_SEL_SHIFT 4
+#define SGTL5000_DAC_SEL_WIDTH 2
+#define SGTL5000_DAC_SEL_ADC 0x0
+#define SGTL5000_DAC_SEL_I2S_IN 0x1
+#define SGTL5000_DAC_SEL_DAP 0x3
+#define SGTL5000_I2S_OUT_SEL_MASK 0x0003
+#define SGTL5000_I2S_OUT_SEL_SHIFT 0
+#define SGTL5000_I2S_OUT_SEL_WIDTH 2
+#define SGTL5000_I2S_OUT_SEL_ADC 0x0
+#define SGTL5000_I2S_OUT_SEL_I2S_IN 0x1
+#define SGTL5000_I2S_OUT_SEL_DAP 0x3
+
+/*
+ * SGTL5000_CHIP_ADCDAC_CTRL
+ */
+#define SGTL5000_VOL_BUSY_DAC_RIGHT 0x2000
+#define SGTL5000_VOL_BUSY_DAC_LEFT 0x1000
+#define SGTL5000_DAC_VOL_RAMP_EN 0x0200
+#define SGTL5000_DAC_VOL_RAMP_EXPO 0x0100
+#define SGTL5000_DAC_MUTE_RIGHT 0x0008
+#define SGTL5000_DAC_MUTE_LEFT 0x0004
+#define SGTL5000_ADC_HPF_FREEZE 0x0002
+#define SGTL5000_ADC_HPF_BYPASS 0x0001
+
+/*
+ * SGTL5000_CHIP_DAC_VOL
+ */
+#define SGTL5000_DAC_VOL_RIGHT_MASK 0xff00
+#define SGTL5000_DAC_VOL_RIGHT_SHIFT 8
+#define SGTL5000_DAC_VOL_RIGHT_WIDTH 8
+#define SGTL5000_DAC_VOL_LEFT_MASK 0x00ff
+#define SGTL5000_DAC_VOL_LEFT_SHIFT 0
+#define SGTL5000_DAC_VOL_LEFT_WIDTH 8
+
+/*
+ * SGTL5000_CHIP_PAD_STRENGTH
+ */
+#define SGTL5000_PAD_I2S_LRCLK_MASK 0x0300
+#define SGTL5000_PAD_I2S_LRCLK_SHIFT 8
+#define SGTL5000_PAD_I2S_LRCLK_WIDTH 2
+#define SGTL5000_PAD_I2S_SCLK_MASK 0x00c0
+#define SGTL5000_PAD_I2S_SCLK_SHIFT 6
+#define SGTL5000_PAD_I2S_SCLK_WIDTH 2
+#define SGTL5000_PAD_I2S_DOUT_MASK 0x0030
+#define SGTL5000_PAD_I2S_DOUT_SHIFT 4
+#define SGTL5000_PAD_I2S_DOUT_WIDTH 2
+#define SGTL5000_PAD_I2C_SDA_MASK 0x000c
+#define SGTL5000_PAD_I2C_SDA_SHIFT 2
+#define SGTL5000_PAD_I2C_SDA_WIDTH 2
+#define SGTL5000_PAD_I2C_SCL_MASK 0x0003
+#define SGTL5000_PAD_I2C_SCL_SHIFT 0
+#define SGTL5000_PAD_I2C_SCL_WIDTH 2
+
+/*
+ * SGTL5000_CHIP_ANA_ADC_CTRL
+ */
+#define SGTL5000_ADC_VOL_M6DB 0x0100
+#define SGTL5000_ADC_VOL_RIGHT_MASK 0x00f0
+#define SGTL5000_ADC_VOL_RIGHT_SHIFT 4
+#define SGTL5000_ADC_VOL_RIGHT_WIDTH 4
+#define SGTL5000_ADC_VOL_LEFT_MASK 0x000f
+#define SGTL5000_ADC_VOL_LEFT_SHIFT 0
+#define SGTL5000_ADC_VOL_LEFT_WIDTH 4
+
+/*
+ * SGTL5000_CHIP_ANA_HP_CTRL
+ */
+#define SGTL5000_HP_VOL_RIGHT_MASK 0x7f00
+#define SGTL5000_HP_VOL_RIGHT_SHIFT 8
+#define SGTL5000_HP_VOL_RIGHT_WIDTH 7
+#define SGTL5000_HP_VOL_LEFT_MASK 0x007f
+#define SGTL5000_HP_VOL_LEFT_SHIFT 0
+#define SGTL5000_HP_VOL_LEFT_WIDTH 7
+
+/*
+ * SGTL5000_CHIP_ANA_CTRL
+ */
+#define SGTL5000_LINE_OUT_MUTE 0x0100
+#define SGTL5000_HP_SEL_MASK 0x0040
+#define SGTL5000_HP_SEL_SHIFT 6
+#define SGTL5000_HP_SEL_WIDTH 1
+#define SGTL5000_HP_SEL_DAC 0x0
+#define SGTL5000_HP_SEL_LINE_IN 0x1
+#define SGTL5000_HP_ZCD_EN 0x0020
+#define SGTL5000_HP_MUTE 0x0010
+#define SGTL5000_ADC_SEL_MASK 0x0004
+#define SGTL5000_ADC_SEL_SHIFT 2
+#define SGTL5000_ADC_SEL_WIDTH 1
+#define SGTL5000_ADC_SEL_MIC 0x0
+#define SGTL5000_ADC_SEL_LINE_IN 0x1
+#define SGTL5000_ADC_ZCD_EN 0x0002
+#define SGTL5000_ADC_MUTE 0x0001
+
+/*
+ * SGTL5000_CHIP_LINREG_CTRL
+ */
+#define SGTL5000_VDDC_MAN_ASSN_MASK 0x0040
+#define SGTL5000_VDDC_MAN_ASSN_SHIFT 6
+#define SGTL5000_VDDC_MAN_ASSN_WIDTH 1
+#define SGTL5000_VDDC_MAN_ASSN_VDDA 0x0
+#define SGTL5000_VDDC_MAN_ASSN_VDDIO 0x1
+#define SGTL5000_VDDC_ASSN_OVRD 0x0020
+#define SGTL5000_LINREG_VDDD_MASK 0x000f
+#define SGTL5000_LINREG_VDDD_SHIFT 0
+#define SGTL5000_LINREG_VDDD_WIDTH 4
+
+/*
+ * SGTL5000_CHIP_REF_CTRL
+ */
+#define SGTL5000_ANA_GND_MASK 0x01f0
+#define SGTL5000_ANA_GND_SHIFT 4
+#define SGTL5000_ANA_GND_WIDTH 5
+#define SGTL5000_ANA_GND_BASE 800 /* mv */
+#define SGTL5000_ANA_GND_STP 25 /*mv */
+#define SGTL5000_BIAS_CTRL_MASK 0x000e
+#define SGTL5000_BIAS_CTRL_SHIFT 1
+#define SGTL5000_BIAS_CTRL_WIDTH 3
+#define SGTL5000_SMALL_POP 0x0001
+
+/*
+ * SGTL5000_CHIP_MIC_CTRL
+ */
+#define SGTL5000_BIAS_R_MASK 0x0200
+#define SGTL5000_BIAS_R_SHIFT 8
+#define SGTL5000_BIAS_R_WIDTH 2
+#define SGTL5000_BIAS_R_off 0x0
+#define SGTL5000_BIAS_R_2K 0x1
+#define SGTL5000_BIAS_R_4k 0x2
+#define SGTL5000_BIAS_R_8k 0x3
+#define SGTL5000_BIAS_VOLT_MASK 0x0070
+#define SGTL5000_BIAS_VOLT_SHIFT 4
+#define SGTL5000_BIAS_VOLT_WIDTH 3
+#define SGTL5000_MIC_GAIN_MASK 0x0003
+#define SGTL5000_MIC_GAIN_SHIFT 0
+#define SGTL5000_MIC_GAIN_WIDTH 2
+
+/*
+ * SGTL5000_CHIP_LINE_OUT_CTRL
+ */
+#define SGTL5000_LINE_OUT_CURRENT_MASK 0x0f00
+#define SGTL5000_LINE_OUT_CURRENT_SHIFT 8
+#define SGTL5000_LINE_OUT_CURRENT_WIDTH 4
+#define SGTL5000_LINE_OUT_CURRENT_180u 0x0
+#define SGTL5000_LINE_OUT_CURRENT_270u 0x1
+#define SGTL5000_LINE_OUT_CURRENT_360u 0x3
+#define SGTL5000_LINE_OUT_CURRENT_450u 0x7
+#define SGTL5000_LINE_OUT_CURRENT_540u 0xf
+#define SGTL5000_LINE_OUT_GND_MASK 0x003f
+#define SGTL5000_LINE_OUT_GND_SHIFT 0
+#define SGTL5000_LINE_OUT_GND_WIDTH 6
+#define SGTL5000_LINE_OUT_GND_BASE 800 /* mv */
+#define SGTL5000_LINE_OUT_GND_STP 25
+#define SGTL5000_LINE_OUT_GND_MAX 0x23
+
+/*
+ * SGTL5000_CHIP_LINE_OUT_VOL
+ */
+#define SGTL5000_LINE_OUT_VOL_RIGHT_MASK 0x1f00
+#define SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT 8
+#define SGTL5000_LINE_OUT_VOL_RIGHT_WIDTH 5
+#define SGTL5000_LINE_OUT_VOL_LEFT_MASK 0x001f
+#define SGTL5000_LINE_OUT_VOL_LEFT_SHIFT 0
+#define SGTL5000_LINE_OUT_VOL_LEFT_WIDTH 5
+
+/*
+ * SGTL5000_CHIP_ANA_POWER
+ */
+#define SGTL5000_DAC_STEREO 0x4000
+#define SGTL5000_LINREG_SIMPLE_POWERUP 0x2000
+#define SGTL5000_STARTUP_POWERUP 0x1000
+#define SGTL5000_VDDC_CHRGPMP_POWERUP 0x0800
+#define SGTL5000_PLL_POWERUP 0x0400
+#define SGTL5000_LINEREG_D_POWERUP 0x0200
+#define SGTL5000_VCOAMP_POWERUP 0x0100
+#define SGTL5000_VAG_POWERUP 0x0080
+#define SGTL5000_ADC_STEREO 0x0040
+#define SGTL5000_REFTOP_POWERUP 0x0020
+#define SGTL5000_HP_POWERUP 0x0010
+#define SGTL5000_DAC_POWERUP 0x0008
+#define SGTL5000_CAPLESS_HP_POWERUP 0x0004
+#define SGTL5000_ADC_POWERUP 0x0002
+#define SGTL5000_LINE_OUT_POWERUP 0x0001
+
+/*
+ * SGTL5000_CHIP_PLL_CTRL
+ */
+#define SGTL5000_PLL_INT_DIV_MASK 0xf800
+#define SGTL5000_PLL_INT_DIV_SHIFT 11
+#define SGTL5000_PLL_INT_DIV_WIDTH 5
+#define SGTL5000_PLL_FRAC_DIV_MASK 0x0700
+#define SGTL5000_PLL_FRAC_DIV_SHIFT 0
+#define SGTL5000_PLL_FRAC_DIV_WIDTH 11
+
+/*
+ * SGTL5000_CHIP_CLK_TOP_CTRL
+ */
+#define SGTL5000_INT_OSC_EN 0x0800
+#define SGTL5000_INPUT_FREQ_DIV2 0x0008
+
+/*
+ * SGTL5000_CHIP_ANA_STATUS
+ */
+#define SGTL5000_HP_LRSHORT 0x0200
+#define SGTL5000_CAPLESS_SHORT 0x0100
+#define SGTL5000_PLL_LOCKED 0x0010
+
+/*
+ * SGTL5000_CHIP_SHORT_CTRL
+ */
+#define SGTL5000_LVLADJR_MASK 0x7000
+#define SGTL5000_LVLADJR_SHIFT 12
+#define SGTL5000_LVLADJR_WIDTH 3
+#define SGTL5000_LVLADJL_MASK 0x0700
+#define SGTL5000_LVLADJL_SHIFT 8
+#define SGTL5000_LVLADJL_WIDTH 3
+#define SGTL5000_LVLADJC_MASK 0x0070
+#define SGTL5000_LVLADJC_SHIFT 4
+#define SGTL5000_LVLADJC_WIDTH 3
+#define SGTL5000_LR_SHORT_MOD_MASK 0x000c
+#define SGTL5000_LR_SHORT_MOD_SHIFT 2
+#define SGTL5000_LR_SHORT_MOD_WIDTH 2
+#define SGTL5000_CM_SHORT_MOD_MASK 0x0003
+#define SGTL5000_CM_SHORT_MOD_SHIFT 0
+#define SGTL5000_CM_SHORT_MOD_WIDTH 2
+
+/*
+ *SGTL5000_CHIP_ANA_TEST2
+ */
+#define SGTL5000_MONO_DAC 0x1000
+
+/*
+ * SGTL5000_DAP_CTRL
+ */
+#define SGTL5000_DAP_MIX_EN 0x0010
+#define SGTL5000_DAP_EN 0x0001
+
+#define SGTL5000_SYSCLK 0x00
+#define SGTL5000_LRCLK 0x01
+
+#endif