Home Home > GIT Browse
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-04ALSA: hda - Initialize missing bass speaker pin for ASUS AIO ET2700Takashi Iwai
commit 1f0bbf03cb829162ec8e6d03c98aaaed88c6f534 upstream. Add a fixup entry for the missing bass speaker pin 0x16 on ASUS ET2700 AiO desktop. The channel map will be added in the next patch, so that this can be backported easily to stable kernels. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ALSA: hda - Create Headhpone Mic Jack Mode when really neededTakashi Iwai
commit ced4cefc75fdb8be95eaee325ad0f6b2fc0a484b upstream. When a headphone jack is configurable as input, the generic parser tries to make it retaskable as Headphone Mic. The switching can be done smoothly if Capture Source control exists (i.e. there is another input source). Or when user explicitly enables the creation of jack mode controls, "Headhpone Mic Jack Mode" will be created accordingly. However, if the headphone mic is the only input source, we have to create "Headphone Mic Jack Mode" control because there is no capture source selection. Otherwise, the generic parser assumes that the input is constantly enabled, thus the headphone is permanently set as input. This situation happens on the old MacBook Airs where no input is supported properly, for example. This patch fixes the problem: now "Headphone Mic Jack Mode" is created when such an input selection isn't possible. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ALSA: hda - Fix hp-mic mode without VREF bitsTakashi Iwai
commit 16c0cefe8951b2c4b824fd06011ac1b359b1ab3b upstream. When the hp mic pin has no VREF bits, the driver forgot to set PIN_IN bit. Spotted during debugging old MacBook Airs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ALSA: hda/realtek - Add support of ALC231 codecKailang Yang
commit ba4c4d0a9021ab034554d532a98133d668b87599 upstream. It's compatible with ALC269. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ALSA: hda/realtek - Set pcbeep amp for ALC668Kailang Yang
commit 9ad54547cf6f4410eba83bb95dfd2a0966718d6d upstream. Set the missing pcbeep default amp for ALC668. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04cpuset: Fix memory allocator deadlockPeter Zijlstra
commit 0fc0287c9ed1ffd3706f8b4d9b314aa102ef1245 upstream. Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0 [ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Reported-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Tested-by: Juri Lelli <juri.lelli@gmail.com> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04cgroup: fix cgroup_subsys_state leak for seq_filesTejun Heo
commit e605b36575e896edd8161534550c9ea021b03bc0 upstream. If a cgroup file implements either read_map() or read_seq_string(), such file is served using seq_file by overriding file->f_op to cgroup_seqfile_operations, which also overrides the release method to single_release() from cgroup_file_release(). Because cgroup_file_open() didn't use to acquire any resources, this used to be fine, but since f7d58818ba42 ("cgroup: pin cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open() pins the css (cgroup_subsys_state) which is put by cgroup_file_release(). The patch forgot to update the release path for seq_files and each open/release cycle leaks a css reference. Fix it by updating cgroup_file_release() to also handle seq_files and using it for seq_file release path too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04cgroup: use a dedicated workqueue for cgroup destructionTejun Heo
commit e5fca243abae1445afbfceebda5f08462ef869d3 upstream. Since be44562613851 ("cgroup: remove synchronize_rcu() from cgroup_diput()"), cgroup destruction path makes use of workqueue. css freeing is performed from a work item from that point on and a later commit, ea15f8ccdb430 ("cgroup: split cgroup destruction into two steps"), moves css offlining to workqueue too. As cgroup destruction isn't depended upon for memory reclaim, the destruction work items were put on the system_wq; unfortunately, some controller may block in the destruction path for considerable duration while holding cgroup_mutex. As large part of destruction path is synchronized through cgroup_mutex, when combined with high rate of cgroup removals, this has potential to fill up system_wq's max_active of 256. Also, it turns out that memcg's css destruction path ends up queueing and waiting for work items on system_wq through work_on_cpu(). If such operation happens while system_wq is fully occupied by cgroup destruction work items, work_on_cpu() can't make forward progress because system_wq is full and other destruction work items on system_wq can't make forward progress because the work item waiting for work_on_cpu() is holding cgroup_mutex, leading to deadlock. This can be fixed by queueing destruction work items on a separate workqueue. This patch creates a dedicated workqueue - cgroup_destroy_wq - for this purpose. As these work items shouldn't have inter-dependencies and mostly serialized by cgroup_mutex anyway, giving high concurrency level doesn't buy anything and the workqueue's @max_active is set to 1 so that destruction work items are executed one by one on each CPU. Hugh Dickins: Because cgroup_init() is run before init_workqueues(), cgroup_destroy_wq can't be allocated from cgroup_init(). Do it from a separate core_initcall(). In the future, we probably want to reorder so that workqueue init happens before cgroup_init(). Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com> Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04workqueue: fix ordered workqueues in NUMA setupsTejun Heo
commit 8a2b75384444488fc4f2cbb9f0921b6a0794838f upstream. An ordered workqueue implements execution ordering by using single pool_workqueue with max_active == 1. On a given pool_workqueue, work items are processed in FIFO order and limiting max_active to 1 enforces the queued work items to be processed one by one. Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues") accidentally broke this guarantee by applying NUMA affinity to ordered workqueues too. On NUMA setups, an ordered workqueue would end up with separate pool_workqueues for different nodes. Each pool_workqueue still limits max_active to 1 but multiple work items may be executed concurrently and out of order depending on which node they are queued to. Fix it by using dedicated ordered_wq_attrs[] when creating ordered workqueues. The new attrs match the unbound ones except that no_numa is always set thus forcing all NUMA nodes to share the default pool_workqueue. While at it, add sanity check in workqueue creation path which verifies that an ordered workqueues has only the default pool_workqueue. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Libin <huawei.libin@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04s390/uaccess: add missing page table walk range checkHeiko Carstens
commit 71a86ef055f569b93bc6901f007bdf447dbf515f upstream. When translating a user space address, the address must be checked against the ASCE limit of the process. If the address is larger than the maximum address that is reachable with the ASCE, an ASCE type exception must be generated. The current code simply ignored the higher order bits. This resulted in an address wrap around in user space instead of an exception in user space. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04arm64: Move PTE_PROT_NONE higher upCatalin Marinas
commit 3676f9ef5481d614f8c5c857f5319755be248268 upstream. PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4325d (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04iio:accel:kxsd9 fix missing mutex unlockFrank Zago
commit 0ee005c7dc2803125275e24598f0fb37775a6af3 upstream. This will leave a lock held after reading from the device, preventing any further reads. Signed-off-by: Frank Zago <frank@zago.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04powerpc/signals: Improved mark VSX not saved with small contexts fixMichael Neuling
commit ec67ad82814bee92251fd963bf01c7a173856555 upstream. In a recent patch: commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42 Author: Michael Neuling <mikey@neuling.org> powerpc/signals: Mark VSX not saved with small contexts We fixed an issue but an improved solution was later discussed after the patch was merged. Firstly, this patch doesn't handle the 64bit signals case, which could also hit this issue (but has never been reported). Secondly, the original patch isn't clear what MSR VSX should be set to. The new approach below always clears the MSR VSX bit (to indicate no VSX is in the context) and sets it only in the specific case where VSX is available (ie. when VSX has been used and the signal context passed has space to provide the state). This reverts the original patch and replaces it with the improved solution. It also adds a 64 bit version. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04HID: uhid: fix leak for 64/32 UHID_CREATEDavid Herrmann
commit 80897aa787ecd58eabb29deab7cbec9249c9b7e6 upstream. UHID allows short writes so user-space can omit unused fields. We automatically set them to 0 in the kernel. However, the 64/32 bit compat-handler didn't do that in the UHID_CREATE fallback. This will reveal random kernel heap data (of random size, even) to user-space. Fixes: befde0226a59 ('HID: uhid: make creating devices work on 64/32 systems') Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04md: test mddev->flags more safely in md_check_recovery.NeilBrown
commit 142d44c310819e1965ca70b4d55d7679f5797e25 upstream. commit 7a0a5355cbc71efa md: Don't test all of mddev->flags at once. made most tests on mddev->flags safer, but missed one. When commit 260fa034ef7a4ff8b7306 md: avoid deadlock when dirty buffers during md_stop. added MD_STILL_CLOSED, this caused md_check_recovery to misbehave. It can think there is something to do but find nothing. This can lead to the md thread spinning during array shutdown. https://bugzilla.kernel.org/show_bug.cgi?id=65721 Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com> Fixes: 260fa034ef7a4ff8b7306 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04md/raid5: Before freeing old multi-thread worker, it should flush them.majianpeng
commit d206dcfa9809ec3409483e93b5e362f801fa0c27 upstream. When changing group_thread_cnt from sysfs entry, the kernel can oops. The kernel messages are: [ 740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961476] PGD b9013067 PUD b651e067 PMD 0 [ 740.961503] Oops: 0000 [#1] SMP [ 740.961525] Modules linked in: netconsole e1000e ptp pps_core [ 740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23 [ 740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000 [ 740.961673] RIP: 0010:[<ffffffff81062570>] [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961708] RSP: 0018:ffff88013a247e08 EFLAGS: 00010086 [ 740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400 [ 740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680 [ 740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d [ 740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00 [ 740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0 [ 740.961861] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 740.961893] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0 [ 740.962001] Stack: [ 740.962001] 0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680 [ 740.962001] ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0 [ 740.962001] ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8 [ 740.962001] Call Trace: [ 740.962001] [<ffffffff810639c6>] worker_thread+0x206/0x3f0 [ 740.962001] [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0 [ 740.962001] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84 [ 740.962001] RIP [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.962001] RSP <ffff88013a247e08> [ 740.962001] CR2: 0000000000000008 [ 740.962001] ---[ end trace 39181460000748de ]--- [ 740.962001] Kernel panic - not syncing: Fatal exception This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH. A worker is queued to handle them. But before calling raid5_do_work, raid5d handles those stripes making conf->active_stripe = 0. So mddev_suspend() can return. We might then free old worker resources before the queued raid5_do_work() handled them. When it runs, it crashes. raid5d() raid5_store_group_thread_cnt() queue_work mddev_suspend() handle_strips active_stripe=0 free(old worker resources) process_one_work raid5_do_work To avoid this, we should only flush the worker resources before freeing them. This fixes a bug introduced in 3.12 so is suitable for the 3.12.x stable series. Fixes: b721420e8719131896b009b11edbbd27 Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Shaohua Li <shli@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04md: fix calculation of stacking limits on level change.NeilBrown
commit 02e5f5c0a0f726e66e3d8506ea1691e344277969 upstream. The various ->run routines of md personalities assume that the 'queue' has been initialised by the blk_set_stacking_limits() call in md_alloc(). However when the level is changed (by level_store()) the ->run routine for the new level is called for an array which has already had the stacking limits modified. This can result in incorrect final settings. So call blk_set_stacking_limits() before ->run in level_store(). A specific consequence of this bug is that it causes discard_granularity to be set incorrectly when reshaping a RAID4 to a RAID0. This is suitable for any -stable kernel since 3.3 in which blk_set_stacking_limits() was introduced. Reported-and-tested-by: "Baldysiak, Pawel" <pawel.baldysiak@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04raid5: Use slow_path to release stripe when mddev->thread is nullmajianpeng
commit ad4068de49862b083ac2a15bc50689bb30ce3e44 upstream. When release_stripe() is called in grow_one_stripe(), the mddev->thread is null. So it will omit one wakeup this thread to release stripe. For this condition, use slow_path to release stripe. Bug was introduced in 3.12 Fixes: 773ca82fa1ee58dd1bf88b Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04setfacl removes part of ACL when setting POSIX ACLs to SambaSteve French
commit b1d93356427be6f050dc55c86eb019d173700af6 upstream. setfacl over cifs mounts can remove the default ACL when setting the (non-default part of) the ACL and vice versa (we were leaving at 0 rather than setting to -1 the count field for the unaffected half of the ACL. For example notice the setfacl removed the default ACL in this sequence: steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir ; setfacl -m default:user:test:rwx,user:test:rwx /mnt/test-dir getfacl: Removing leading '/' from absolute path names user::rwx group::r-x other::r-x default:user::rwx default:user:test:rwx default:group::r-x default:mask::rwx default:other::r-x steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir getfacl: Removing leading '/' from absolute path names user::rwx user:test:rwx group::r-x mask::rwx other::r-x Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Jeremy Allison <jra@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04HID: wiimote: fix inverted pro-controller axesDavid Herrmann
commit 0abda6fa81dced031e3df31ac29bfb253549c2d1 upstream. The analog-stick vertical axes are inverted. Fix that! Otherwise, games and other gamepad applications need to carry their own fixups (which they thankfully haven't done, yet). Reported-by: Rafael Brune <mail@rbrune.de> Tested-by: Rafael Brune <mail@rbrune.de> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04edac, highbank: Fix interrupt setup of mem and l2 controllerRobert Richter
commit a72b8859fd3941cc1d2940d5c43026d2c6fb959e upstream. Register and enable interrupts after the edac registration. Otherwise incomming ecc error interrupts lead to crashes during device setup. Fixing this in drivers for mc and l2. Signed-off-by: Robert Richter <robert.richter@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Robert Richter <rric@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ib_isert: Avoid duplicate iscsit_increment_maxcmdsn callNicholas Bellinger
commit 04d9cd1224e5bc9d6146bab2866cdc81deb9b509 upstream. This patch avoids a duplicate iscsit_increment_maxcmdsn() call for ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(), which will already be occuring once during isert_put_datain() -> iscsit_build_rsp_pdu() operation. It also removes the local conn->stat_sn assignment + increment, and changes the third parameter to iscsit_build_rsp_pdu() to signal this should be done by iscsi_target_mode code. Tested-by: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04radeon: workaround pinning failure on low ram gpuJerome Glisse
commit 97b6ff6be9da7675aab339334fda996d6c5077d9 upstream. GPU with low amount of ram can fails at pinning new framebuffer before unpinning old one. On such failure, retry with unpinning old one before pinning new one allowing to work around the issue. This is somewhat ugly but only affect those old GPU we care about. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/radeon: adjust TN dpm parameters for stability (v2)Alex Deucher
commit 958b84fb3bef193198538b5c5902fa687cc8363f upstream. Adjust some of the TN dpm settings for stability. Enabling these features causes hangs and other stability problems on certain boards. v2: leave uvd dpm enabled Bug: https://bugzilla.kernel.org/show_bug.cgi?id=63101 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/radeon: hook up backlight functions for CI and KV family.Samuel Li
commit 7272c9d2286525d4c6bce788243cf2b6f306d15c upstream. Fixes crashes when handling atif events due to the lack of a callback being registered. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04radeon/i2c: do not count reg index in number of i2c byte we are writing.Jerome Glisse
commit fae009d15a44e5f1d938340facf4b8bc7dc69a09 upstream. Useless to count the register index in number of bytes we are writing. Fixes a regression with hw i2c enabled. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/radeon: don't share PPLLs on DCE4.1Alex Deucher
commit 70471860ff9f335c60c004d42ebd48945bfa5403 upstream. Sharing PPLLs seems to cause problems on some boards. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=45334 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/radeon: fix UVD destroy IB sizeChristian König
commit 727ddc84a1373bf06b2fa261f44e38fb0faf5340 upstream. The parameter is in bytes not dwords. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/radeon: activate UVD clocks before sending the destroy msgChristian König
commit c154a76311293f9671439286834aa325b7ef59fe upstream. Make sure the UVD clocks are still active before sending the destroy message, otherwise the hw might hang. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/radeon/si: fix define for MC_SEQ_TRAIN_WAKEUP_CNTLAlex Deucher
commit d5693761b2b4ff530c8af8af9ec55b6eae76e617 upstream. Typo in the register offset. Noticed-by: Sylvain BERTRAND <sylware@legeek.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fenceBen Skeggs
commit 9360bd1112d8874d21942e2ae74f5416b00a8db6 upstream. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/i915: Replicate BIOS eDP bpp clamping hack for hswDaniel Vetter
commit 1021442098ee9328fdd4d113d63a3a7f2f40c37b upstream. Haswell's DDI encoders have their own ->get_config callback and in commit c6cd2ee2d59111a07cd9199564c9bdcb2d11e5cf Author: Jani Nikula <jani.nikula@intel.com> Date: Mon Oct 21 10:52:07 2013 +0300 drm/i915/dp: workaround BIOS eDP bpp clamping issue we've forgotten to replicate this hack. So let's do it that. Note for backporters: The above commit and all it's depencies need to be backported first. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71049 Tested-by: Gökçen Eraslan <gokcen.eraslan@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/i915: restore the early forcewake cleanupDaniel Vetter
commit ef46e0d247da0a7a408573aa15870e231bbd4af2 upstream. Some BIOS just leak the forcewak bits, which we clean up. Unfortunately this has been broken in commit 521198a2e7095c8c7daa8d7d3a76a110c346be6f Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Fri Aug 23 16:52:30 2013 +0300 drm/i915: sanitize forcewake registers on reset To make this work both for resets and for BIOS takeover just add the forcewake clearing call back to intel_uncore_early_sanitize. We need to clear the forcewake in early sanitize so that the forcewak dance in intel_uncore_init (to figure out whether we have mt or legacy forcewake on ivb) works. That cleanup fits in nicely with the general topic of early_sanitize to prepare for the very first mmio ops. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Jörg Otte <jrg.otte@gmail.com> Cc: Jörg Otte <jrg.otte@gmail.com> References: https://lkml.org/lkml/2013/11/16/40 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/i915: flush cursors harderDaniel Vetter
commit b2ea8ef559b4d94190009f3651b5b3ab7c05afd3 upstream. Apparently they need the same treatment as primary planes. This fixes modesetting failures because of stuck cursors (!) on Thomas' i830M machine. I've figured while at it I'll also roll it out for the ivb 3 pipe version of this function. I didn't do this for i845/i865 since Bspec says the update mechanism works differently, and there's some additional rules about what can be updated in which order. Tested-by: Thomas Richter <thor@math.tu-berlin.de> Cc: Thomas Richter <thor@math.tu-berlin.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/i915/dvo: call ->mode_set callback only when the port is runningDaniel Vetter
commit 48f34e10169dbb3dd7a19af64e328492b7f54af4 upstream. The ns2501 controller seems to need the dpll and dvo port to accept the timing update commands. Quick testing on my x30 here seems to indicate that other dvo controllers don't mind. So let's move the ->mode_set callback to a place where we have the port up and running already. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Thomas Richter <thor@math.tu-berlin.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/ttm: Fix ttm_bo_move_memcpyThomas Hellstrom
commit da95c788ef0c645378ffccb7060a0df1a33aee38 upstream. All error paths will want to keep the mm node, so handle this at the function exit. This fixes an ioremap failure error path. Also add some comments to make the function a bit easier to understand. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/ttm: Handle in-memory region copiesJakob Bornecrantz
commit 9a0599ddeae012a771bba5e23393fc52d8a59d89 upstream. Fix the case where the ttm pointer may be NULL causing a NULL pointer dereference. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellström <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/ttm: Fix memory type compatibility checkThomas Hellstrom
commit 59c8e66378fb78adbcd05f0d09783dde6fef282b upstream. Also check the busy placements before deciding to move a buffer object. Failing to do this may result in a completely unneccessary move within a single memory type. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04drm/vmwgfx: Resource evict fixesThomas Hellstrom
commit ea029c28deadc33d2af4baf26810dd5fc44d4926 upstream. Fix an error message that was incorrectly blaming device resource id shortage. Also make sure we correctly catch resource eviction errors, that could otherwise lead to evictable resources temporarily not being on the LRU list. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ftrace: Fix function graph with loading of modulesSteven Rostedt (Red Hat)
commit 8a56d7761d2d041ae5e8215d20b4167d8aa93f51 upstream. Commit 8c4f3c3fa9681 "ftrace: Check module functions being traced on reload" fixed module loading and unloading with respect to function tracing, but it missed the function graph tracer. If you perform the following # cd /sys/kernel/debug/tracing # echo function_graph > current_tracer # modprobe nfsd # echo nop > current_tracer You'll get the following oops message: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9() Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000 0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668 ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000 Call Trace: [<ffffffff814fe193>] dump_stack+0x4f/0x7c [<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b [<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9 [<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c [<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9 [<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364 [<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b [<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78 [<ffffffff810c4b30>] graph_trace_reset+0xe/0x10 [<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a [<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd [<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde [<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e [<ffffffff81122aed>] vfs_write+0xab/0xf6 [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85 [<ffffffff81122dbd>] SyS_write+0x59/0x82 [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85 [<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b ---[ end trace 940358030751eafb ]--- The above mentioned commit didn't go far enough. Well, it covered the function tracer by adding checks in __register_ftrace_function(). The problem is that the function graph tracer circumvents that (for a slight efficiency gain when function graph trace is running with a function tracer. The gain was not worth this). The problem came with ftrace_startup() which should always be called after __register_ftrace_function(), if you want this bug to be completely fixed. Anyway, this solution moves __register_ftrace_function() inside of ftrace_startup() and removes the need to call them both. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Fixes: ed926f9b35cd ("ftrace: Use counters to enable functions to trace") Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04sony-laptop: do not scribble keyboard backlight registers on resumeMattia Dongili
commit b975dc3689fc6a3718ad288ce080924f9cb7e176 upstream. Follow-up to commit 294d31e8227c ("sony-laptop: don't change keyboard backlight settings"): avoid messing up the state on resume. Leave it to what was before suspending as it's anyway likely that we still don't know what value we should write to the EC registers. This fix is also required in 3.12 Tested-by: Karol Babioch <karol@babioch.de> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04regulator: pfuze100: allow misprogrammed IDTim Harvey
commit 88baf7148e899db7e0b676e4363647f50e48eaed upstream. prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04prism54: set netdev type to "wlan"Dan Williams
commit 8e3ffa471091c560deb6738ed9ab7445b7a5fd04 upstream. Userspace uses the netdev devtype for stuff like device naming and type detection. Be nice and set it. Remove the pointless #if/#endif around SET_NETDEV_DEV too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04n_tty: Ensure reader restarts worker for next readerPeter Hurley
commit 42458f41d08f0873299e830464c1232a6839297d upstream. A departing reader must restart a flush_to_ldisc() worker _before_ the next reader enters the read loop; this is to avoid the new reader concluding no more i/o is available and prematurely exiting, when the old reader simply hasn't re-started the worker yet. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04tty: Reset hupped state on openPeter Hurley
commit d4855e1fc03c2bb32dd64badf51cec5a2a26ab2a upstream. A common security idiom is to hangup the current tty (via vhangup()) after forking but before execing a root shell. This hangs up any existing opens which other processes may have and ensures subsequent opens have the necessary permissions to open the root shell tty/pty. Reset the TTY_HUPPED state after the driver has successfully returned the opened tty (perform the reset while the tty is locked to avoid racing with concurrent hangups). Reported-by: Heorhi Valakhanovich <valahanovich@tut.by> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Heorhi Valakhanovich <valahanovich@tut.by> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04n_tty: Fix echo overrun tail computationPeter Hurley
commit 6f2225363c205e186c1465c2c7c84f17c1635504 upstream. Commit cbfd0340ae1993378fd47179db949e050e16e697, 'n_tty: Process echoes in blocks', introduced an error when consuming the echo buffer tail to prevent buffer overrun, where the incorrect operation code byte is checked to determine how far to advance the tail to the next echo byte. Check the correct byte for the echo operation code byte. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04tty: incorrect test of echo_buf() result for ECHO_OP_STARTRoel Kluin
commit c476f6584b0011741b4f0316f1ac4aa3a99403e1 upstream. test echo_buf() result for ECHO_OP_START Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04n_tty: Fix 4096-byte canonical readsPeter Hurley
commit c77569d2f3ef7844ee4ac7005a57da6898b302a8 upstream. Although the maximum allowable canonical line is specified to be 255 bytes (MAX_CANON), the practical limit has actually been the size of the line discipline read buffer (N_TTY_BUF_SIZE == 4096). Commit 32f13521ca68bc624ff6effc77f308a52b038bf0, n_tty: Line copy to user buffer in canonical mode, limited the line copy to 4095 bytes. With a completely full line discipline read buffer and a userspace buffer > 4095, _no_ data was copied, and the read() syscall returned 0, indicating EOF. Fix the interval arithmetic to compute the correct number of bytes to copy to userspace in the range [1..4096]. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04avr32: fix out-of-range jump in large kernelsAndreas Bießmann
commit d617b338bbfdd77e9cbd8e7dc949cee3dd73d575 upstream. This patch fixes following error (for big kernels): ---8<--- arch/avr32/boot/u-boot/head.o: In function `no_tag_table': (.init.text+0x44): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o arch/avr32/kernel/built-in.o: In function `bad_return': (.ex.text+0x236): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o --->8--- It comes up when the kernel increases and 'panic()' is too far away to fit in the +/- 2MiB range. Which in turn issues from the 21-bit displacement in 'br{cond4}' mnemonic which is one of the two ways to do jumps (rjmp has just 10-bit displacement and therefore a way smaller range). This fact was stated before in 8d29b7b9f81d6b83d869ff054e6c189d6da73f1f. One solution to solve this is to add a local storage for the symbol address and just load the $pc with that value. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04avr32: setup crt for early panic()Andreas Bießmann
commit 7a2a74f4b856993218aa7cdeeb6c3103101340db upstream. Before the CRT was (fully) set up in kernel_entry (bss cleared before in _start, but also not before jump to panic() in no_tag_table case). This patch fixes this up to have a fully working CRT when branching to panic() in no_tag_table. Signed-off-by: Andreas Bießmann <andreas@biessmann.de> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>