Home Home > GIT Browse
AgeCommit message (Collapse)Author
2018-04-24Linux 4.9.96v4.9.96Greg Kroah-Hartman
2018-04-24block/mq: fix potential deadlock during cpu hotplugWanpeng Li
commit 51d638b1f56a0bfd9219800620994794a1a2b219 upstream. This can be triggered by hot-unplug one cpu. ====================================================== [ INFO: possible circular locking dependency detected ] 4.11.0+ #17 Not tainted ------------------------------------------------------- step_after_susp/2640 is trying to acquire lock: (all_q_mutex){+.+...}, at: [<ffffffffb33f95b8>] blk_mq_queue_reinit_work+0x18/0x110 but task is already holding lock: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug.lock){+.+.+.}: lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 get_online_cpus+0x64/0x80 blk_mq_init_allocated_queue+0x3a0/0x4e0 blk_mq_init_queue+0x3a/0x60 loop_add+0xe5/0x280 loop_init+0x124/0x177 do_one_initcall+0x53/0x1c0 kernel_init_freeable+0x1e3/0x27f kernel_init+0xe/0x100 ret_from_fork+0x31/0x40 -> #0 (all_q_mutex){+.+...}: __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 __mutex_lock+0x92/0x990 mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 do_syscall_64+0x8f/0x710 return_from_SYSCALL_64+0x0/0x7a other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(all_q_mutex); lock(cpu_hotplug.lock); lock(all_q_mutex); *** DEADLOCK *** 8 locks held by step_after_susp/2640: #0: (sb_writers#6){.+.+.+}, at: [<ffffffffb3244aed>] vfs_write+0x1ad/0x1d0 #1: (&of->mutex){+.+.+.}, at: [<ffffffffb32d3a51>] kernfs_fop_write+0x101/0x1c0 #2: (s_active#166){.+.+.+}, at: [<ffffffffb32d3a59>] kernfs_fop_write+0x109/0x1c0 #3: (pm_mutex){+.+...}, at: [<ffffffffb30d2ecd>] pm_suspend+0x21d/0x490 #4: (acpi_scan_lock){+.+.+.}, at: [<ffffffffb34dc3d7>] acpi_scan_lock_acquire+0x17/0x20 #5: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffffb306d6d7>] freeze_secondary_cpus+0x27/0x390 #6: (cpu_hotplug.dep_map){++++++}, at: [<ffffffffb306cfd5>] cpu_hotplug_begin+0x5/0xe0 #7: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0 stack backtrace: CPU: 3 PID: 2640 Comm: step_after_susp Not tainted 4.11.0+ #17 Hardware name: Dell Inc. OptiPlex 7040/0JCTF8, BIOS 1.4.9 09/12/2016 Call Trace: dump_stack+0x99/0xce print_circular_bug+0x1fa/0x270 __lock_acquire+0x189a/0x18a0 lock_acquire+0x11c/0x230 ? lock_acquire+0x11c/0x230 ? blk_mq_queue_reinit_work+0x18/0x110 ? blk_mq_queue_reinit_work+0x18/0x110 __mutex_lock+0x92/0x990 ? blk_mq_queue_reinit_work+0x18/0x110 ? kmem_cache_free+0x2cb/0x330 ? anon_transport_class_unregister+0x20/0x20 ? blk_mq_queue_reinit_work+0x110/0x110 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 blk_mq_queue_reinit_work+0x18/0x110 blk_mq_queue_reinit_dead+0x1c/0x20 cpuhp_invoke_callback+0x1f2/0x810 ? __flow_cache_shrink+0x160/0x160 cpuhp_down_callbacks+0x42/0x80 _cpu_down+0xb2/0xe0 freeze_secondary_cpus+0xb6/0x390 suspend_devices_and_enter+0x3b3/0xa40 ? rcu_read_lock_sched_held+0x79/0x80 pm_suspend+0x129/0x490 state_store+0x82/0xf0 kobj_attr_store+0xf/0x20 sysfs_kf_write+0x45/0x60 kernfs_fop_write+0x135/0x1c0 __vfs_write+0x37/0x160 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2f/0x60 ? __sb_start_write+0xd9/0x1c0 ? vfs_write+0x1ad/0x1d0 vfs_write+0xcd/0x1d0 SyS_write+0x58/0xc0 ? rcu_read_lock_sched_held+0x79/0x80 do_syscall_64+0x8f/0x710 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL64_slow_path+0x25/0x25 The cpu hotplug path will hold cpu_hotplug.lock and then reinit all exiting queues for blk mq w/ all_q_mutex, however, blk_mq_init_allocated_queue() will contend these two locks in the inversion order. This is due to commit eabe06595d62 (blk/mq: Cure cpu hotplug lock inversion), it fixes a cpu hotplug lock inversion issue because of hotplug rework, however the hotplug rework is still work-in-progress and lives in a -tip branch and mainline cannot yet trigger that splat. The commit breaks the linus's tree in the merge window, so this patch reverts the lock order and avoids to splat linus's tree. Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Cc: Thierry Escande <thierry.escande@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24writeback: safer lock nestingGreg Thelen
commit 2e898e4c0a3897ccd434adac5abb8330194f527b upstream. lock_page_memcg()/unlock_page_memcg() use spin_lock_irqsave/restore() if the page's memcg is undergoing move accounting, which occurs when a process leaves its memcg for a new one that has memory.move_charge_at_immigrate set. unlocked_inode_to_wb_begin,end() use spin_lock_irq/spin_unlock_irq() if the given inode is switching writeback domains. Switches occur when enough writes are issued from a new domain. This existing pattern is thus suspicious: lock_page_memcg(page); unlocked_inode_to_wb_begin(inode, &locked); ... unlocked_inode_to_wb_end(inode, locked); unlock_page_memcg(page); If both inode switch and process memcg migration are both in-flight then unlocked_inode_to_wb_end() will unconditionally enable interrupts while still holding the lock_page_memcg() irq spinlock. This suggests the possibility of deadlock if an interrupt occurs before unlock_page_memcg(). truncate __cancel_dirty_page lock_page_memcg unlocked_inode_to_wb_begin unlocked_inode_to_wb_end <interrupts mistakenly enabled> <interrupt> end_page_writeback test_clear_page_writeback lock_page_memcg <deadlock> unlock_page_memcg Due to configuration limitations this deadlock is not currently possible because we don't mix cgroup writeback (a cgroupv2 feature) and memory.move_charge_at_immigrate (a cgroupv1 feature). If the kernel is hacked to always claim inode switching and memcg moving_account, then this script triggers lockup in less than a minute: cd /mnt/cgroup/memory mkdir a b echo 1 > a/memory.move_charge_at_immigrate echo 1 > b/memory.move_charge_at_immigrate ( echo $BASHPID > a/cgroup.procs while true; do dd if=/dev/zero of=/mnt/big bs=1M count=256 done ) & while true; do sync done & sleep 1h & SLEEP=$! while true; do echo $SLEEP > a/cgroup.procs echo $SLEEP > b/cgroup.procs done The deadlock does not seem possible, so it's debatable if there's any reason to modify the kernel. I suggest we should to prevent future surprises. And Wang Long said "this deadlock occurs three times in our environment", so there's more reason to apply this, even to stable. Stable 4.4 has minor conflicts applying this patch. For a clean 4.4 patch see "[PATCH for-4.4] writeback: safer lock nesting" https://lkml.org/lkml/2018/4/11/146 Wang Long said "this deadlock occurs three times in our environment" [gthelen@google.com: v4] Link: http://lkml.kernel.org/r/20180411084653.254724-1-gthelen@google.com [akpm@linux-foundation.org: comment tweaks, struct initialization simplification] Change-Id: Ibb773e8045852978f6207074491d262f1b3fb613 Link: http://lkml.kernel.org/r/20180410005908.167976-1-gthelen@google.com Fixes: 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates") Signed-off-by: Greg Thelen <gthelen@google.com> Reported-by: Wang Long <wanglong19@meituan.com> Acked-by: Wang Long <wanglong19@meituan.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> [v4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [natechancellor: Adjust context due to lack of b93b016313b3b] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24fanotify: fix logic of events on childAmir Goldstein
commit 54a307ba8d3cd00a3902337ffaae28f436eeb1a4 upstream. When event on child inodes are sent to the parent inode mark and parent inode mark was not marked with FAN_EVENT_ON_CHILD, the event will not be delivered to the listener process. However, if the same process also has a mount mark, the event to the parent inode will be delivered regadless of the mount mark mask. This behavior is incorrect in the case where the mount mark mask does not contain the specific event type. For example, the process adds a mark on a directory with mask FAN_MODIFY (without FAN_EVENT_ON_CHILD) and a mount mark with mask FAN_CLOSE_NOWRITE (without FAN_ONDIR). A modify event on a file inside that directory (and inside that mount) should not create a FAN_MODIFY event, because neither of the marks requested to get that event on the file. Fixes: 1968f5eed54c ("fanotify: use both marks when possible") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> [natechancellor: Fix small conflict due to lack of 3cd5eca8d7a2f] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24mm/filemap.c: fix NULL pointer in page_cache_tree_insert()Matthew Wilcox
commit abc1be13fd113ddef5e2d807a466286b864caed3 upstream. f2fs specifies the __GFP_ZERO flag for allocating some of its pages. Unfortunately, the page cache also uses the mapping's GFP flags for allocating radix tree nodes. It always masked off the __GFP_HIGHMEM flag, and masks off __GFP_ZERO in some paths, but not all. That causes radix tree nodes to be allocated with a NULL list_head, which causes backtraces like: __list_del_entry+0x30/0xd0 list_lru_del+0xac/0x1ac page_cache_tree_insert+0xd8/0x110 The __GFP_DMA and __GFP_DMA32 flags would also be able to sneak through if they are ever used. Fix them all by using GFP_RECLAIM_MASK at the innermost location, and remove it from earlier in the callchain. Link: http://lkml.kernel.org/r/20180411060320.14458-2-willy@infradead.org Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reported-by: Chris Fries <cfries@google.com> Debugged-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24autofs: mount point create should honour passed in modeIan Kent
commit 1e6306652ba18723015d1b4967fe9de55f042499 upstream. The autofs file system mkdir inode operation blindly sets the created directory mode to S_IFDIR | 0555, ingoring the passed in mode, which can cause selinux dac_override denials. But the function also checks if the caller is the daemon (as no-one else should be able to do anything here) so there's no point in not honouring the passed in mode, allowing the daemon to set appropriate mode when required. Link: http://lkml.kernel.org/r/152361593601.8051.14014139124905996173.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24Don't leak MNT_INTERNAL away from internal mountsAl Viro
commit 16a34adb9392b2fe4195267475ab5b472e55292c upstream. We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for their copies. As it is, creating a deep stack of bindings of /proc/*/ns/* somewhere in a new namespace and exiting yields a stack overflow. Cc: stable@kernel.org Reported-by: Alexander Aring <aring@mojatatu.com> Bisected-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com> Tested-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24rpc_pipefs: fix double-dput()Al Viro
commit 4a3877c4cedd95543f8726b0a98743ed8db0c0fb upstream. if we ever hit rpc_gssd_dummy_depopulate() dentry passed to it has refcount equal to 1. __rpc_rmpipe() drops it and dput() done after that hits an already freed dentry. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24orangefs_kill_sb(): deal with allocation failuresAl Viro
commit 659038428cb43a66e3eff71e2c845c9de3611a98 upstream. orangefs_fill_sb() might've failed to allocate ORANGEFS_SB(s); don't oops in that case. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24hypfs_kill_super(): deal with failed allocationsAl Viro
commit a24cd490739586a7d2da3549a1844e1d7c4f4fc4 upstream. hypfs_fill_super() might fail to allocate sbi; hypfs_kill_super() should not oops on that. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24jffs2_kill_sb(): deal with failed allocationsAl Viro
commit c66b23c2840446a82c389e4cb1a12eb2a71fa2e4 upstream. jffs2_fill_super() might fail to allocate jffs2_sb_info; jffs2_kill_sb() must survive that. Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24udf: Fix leak of UTF-16 surrogates into encoded stringsJan Kara
commit 44f06ba8297c7e9dfd0e49b40cbe119113cca094 upstream. OSTA UDF specification does not mention whether the CS0 charset in case of two bytes per character encoding should be treated in UTF-16 or UCS-2. The sample code in the standard does not treat UTF-16 surrogates in any special way but on systems such as Windows which work in UTF-16 internally, filenames would be treated as being in UTF-16 effectively. In Linux it is more difficult to handle characters outside of Base Multilingual plane (beyond 0xffff) as NLS framework works with 2-byte characters only. Just make sure we don't leak UTF-16 surrogates into the resulting string when loading names from the filesystem for now. CC: stable@vger.kernel.org # >= v4.6 Reported-by: Mingye Wang <arthur200126@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24powerpc/lib: Fix off-by-one in alternate feature patchingMichael Ellerman
commit b8858581febb050688e276b956796bc4a78299ed upstream. When we patch an alternate feature section, we have to adjust any relative branches that branch out of the alternate section. But currently we have a bug if we have a branch that points to past the last instruction of the alternate section, eg: FTR_SECTION_ELSE 1: b 2f or 6,6,6 2: ALT_FTR_SECTION_END(...) nop This will result in a relative branch at 1 with a target that equals the end of the alternate section. That branch does not need adjusting when it's moved to the non-else location. Currently we do adjust it, resulting in a branch that goes off into the link-time location of the else section, which is junk. The fix is to not patch branches that have a target == end of the alternate section. Fixes: d20fe50a7b3c ("KVM: PPC: Book3S HV: Branch inside feature section") Fixes: 9b1a735de64c ("powerpc: Add logic to patch alternative feature sections") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24powerpc/eeh: Fix enabling bridge MMIO windowsMichael Neuling
commit 13a83eac373c49c0a081cbcd137e79210fe78acd upstream. On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them. Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again. This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix. The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth). With this patch, only 1 EEH event occurs and devices properly recover. Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset") Cc: stable@vger.kernel.org # v3.11+ Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24MIPS: memset.S: Fix clobber of v1 in last_fixupMatt Redfearn
commit c96eebf07692e53bf4dd5987510d8b550e793598 upstream. The label .Llast_fixup\@ is jumped to on page fault within the final byte set loop of memset (on < MIPSR6 architectures). For some reason, in this fault handler, the v1 register is randomly set to a2 & STORMASK. This clobbers v1 for the calling function. This can be observed with the following test code: static int __init __attribute__((optimize("O0"))) test_clear_user(void) { register int t asm("v1"); char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { t = 0xa5a5a5a5; if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k); } if (t != 0xa5a5a5a5) { pr_err("v1 was clobbered to 0x%x!\n", t); } } return 0; } late_initcall(test_clear_user); Which demonstrates that v1 is indeed clobbered (MIPS64): Testing clear_user v1 was clobbered to 0x1! v1 was clobbered to 0x2! v1 was clobbered to 0x3! v1 was clobbered to 0x4! v1 was clobbered to 0x5! v1 was clobbered to 0x6! v1 was clobbered to 0x7! Since the number of bytes that could not be set is already contained in a2, the andi placing a value in v1 is not necessary and actively harmful in clobbering v1. Reported-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19109/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24MIPS: memset.S: Fix return of __clear_user from Lpartial_fixupMatt Redfearn
commit daf70d89f80c6e1772233da9e020114b1254e7e0 upstream. The __clear_user function is defined to return the number of bytes that could not be cleared. From the underlying memset / bzero implementation this means setting register a2 to that number on return. Currently if a page fault is triggered within the memset_partial block, the value loaded into a2 on return is meaningless. The label .Lpartial_fixup\@ is jumped to on page fault. In order to work out how many bytes failed to copy, the exception handler should find how many bytes left in the partial block (andi a2, STORMASK), add that to the partial block end address (a2), and subtract the faulting address to get the remainder. Currently it incorrectly subtracts the partial block start address (t1), which has additionally been clobbered to generate a jump target in memset_partial. Fix this by adding the block end address instead. This issue was found with the following test code: int j, k; for (j = 0; j < 512; j++) { if ((k = clear_user(NULL, j)) != j) { pr_err("clear_user (NULL %d) returned %d\n", j, k); } } Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64). Suggested-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19108/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24MIPS: memset.S: EVA & fault support for small_memsetMatt Redfearn
commit 8a8158c85e1e774a44fbe81106fa41138580dfd1 upstream. The MIPS kernel memset / bzero implementation includes a small_memset branch which is used when the region to be set is smaller than a long (4 bytes on 32bit, 8 bytes on 64bit). The current small_memset implementation uses a simple store byte loop to write the destination. There are 2 issues with this implementation: 1. When EVA mode is active, user and kernel address spaces may overlap. Currently the use of the sb instruction means kernel mode addressing is always used and an intended write to userspace may actually overwrite some critical kernel data. 2. If the write triggers a page fault, for example by calling __clear_user(NULL, 2), instead of gracefully handling the fault, an OOPS is triggered. Fix these issues by replacing the sb instruction with the EX() macro, which will emit EVA compatible instuctions as required. Additionally implement a fault fixup for small_memset which sets a2 to the number of bytes that could not be cleared (as defined by __clear_user). Reported-by: Chuanhua Lei <chuanhua.lei@intel.com> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18975/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24MIPS: uaccess: Add micromips clobbers to bzero invocationMatt Redfearn
commit b3d7e55c3f886493235bfee08e1e5a4a27cbcce8 upstream. The micromips implementation of bzero additionally clobbers registers t7 & t8. Specify this in the clobbers list when invoking bzero. Fixes: 26c5e07d1478 ("MIPS: microMIPS: Optimise 'memset' core library function.") Reported-by: James Hogan <jhogan@kernel.org> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.10+ Patchwork: https://patchwork.linux-mips.org/patch/19110/ Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed deviceRodrigo Rivas Costa
commit a955358d54695e4ad9f7d6489a7ac4d69a8fc711 upstream. Doing `ioctl(HIDIOCGFEATURE)` in a tight loop on a hidraw device and then disconnecting the device, or unloading the driver, can cause a NULL pointer dereference. When a hidraw device is destroyed it sets 0 to `dev->exist`. Most functions check 'dev->exist' before doing its work, but `hidraw_get_report()` was missing that check. Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24random: add new ioctl RNDRESEEDCRNGTheodore Ts'o
commit d848e5f8e1ebdb227d045db55fe4f825e82965fa upstream. Add a new ioctl which forces the the crng to be reseeded. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24random: crng_reseed() should lock the crng instance that it is modifyingTheodore Ts'o
commit 0bb29a849a6433b72e249eea7695477b02056e94 upstream. Reported-by: Jann Horn <jannh@google.com> Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly...") Cc: stable@kernel.org # 4.8+ Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24random: fix crng_ready() testTheodore Ts'o
commit 43838a23a05fbd13e47d750d3dfd77001536dd33 upstream. The crng_init variable has three states: 0: The CRNG is not initialized at all 1: The CRNG has a small amount of entropy, hopefully good enough for early-boot, non-cryptographical use cases 2: The CRNG is fully initialized and we are sure it is safe for cryptographic use cases. The crng_ready() function should only return true once we are in the last state. This addresses CVE-2018-1108. Reported-by: Jann Horn <jannh@google.com> Fixes: e192be9d9a30 ("random: replace non-blocking pool...") Cc: stable@kernel.org # 4.8+ Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: hda - New VIA controller suppor no-snoop pathDavid Wang
commit af52f9982e410edac21ca4b49563053ffc9da1eb upstream. This patch is used to tell kernel that new VIA HDAC controller also support no-snoop path. [ minor coding style fix by tiwai ] Signed-off-by: David Wang <davidwang@zhaoxin.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: rawmidi: Fix missing input substream checks in compat ioctlsTakashi Iwai
commit 8a56ef4f3ffba9ebf4967b61ef600b0a7ba10f11 upstream. Some rawmidi compat ioctls lack of the input substream checks (although they do check only for rfile->output). This many eventually lead to an Oops as NULL substream is passed to the rawmidi core functions. Fix it by adding the proper checks before each function call. The bug was spotted by syzkaller. Reported-by: syzbot+f7a0348affc3b67bc617@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: line6: Use correct endpoint type for midi outputFabián Inostroza
commit 7ecb46e9ee9af18e304eb9e7d6804c59a408e846 upstream. Sending MIDI messages to a PODxt through the USB connection shows "usb_submit_urb failed" in dmesg and the message is not received by the POD. The error is caused because in the funcion send_midi_async() in midi.c there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt USB descriptor shows that this endpoint it's an interrupt endpoint. Patch tested with PODxt only. [ The bug has been present from the very beginning in the staging driver time, but Fixes below points to the commit moving to sound/ directory so that the fix can be cleanly applied -- tiwai ] Fixes: 61864d844c29 ("ALSA: move line6 usb driver into sound/usb") Signed-off-by: Fabián Inostroza <fabianinostroza@udec.cl> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/radeon: Fix PCIe lane width calculationPaul Parsons
commit 85e290d92b4b794d0c758c53007eb4248d385386 upstream. Two years ago I tried an AMD Radeon E8860 embedded GPU with the drm driver. The dmesg output included driver warnings about an invalid PCIe lane width. Tracking the problem back led to si_set_pcie_lane_width_in_smc(). The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Applying the increment silenced the warnings. The code has not changed since, so either my analysis was incorrect or the bug has gone unnoticed. Hence submitting this as an RFC. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/rockchip: Clear all interrupts before requesting the IRQMarc Zyngier
commit 5f9e93fed4d45e9a8f84728aff1a8f2ab8922902 upstream. Calling request_irq() followed by disable_irq() is usually a bad idea, specially if the interrupt can be pending, and you're not yet in a position to handle it. This is exactly what happens on my kevin system when rebooting in a second kernel using kexec: Some interrupt is left pending from the previous kernel, and we take it too early, before disable_irq() could do anything. Let's clear the pending interrupts as we initialize the HW, and move the interrupt request after that point. This ensures that we're in a sane state when the interrupt is requested. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [adapted to recent rockchip-drm changes] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-2-marc.zyngier@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/amdgpu: Fix PCIe lane width calculationAlex Deucher
commit 41212e2fe72b26ded7ed78224d9eab720c2891e2 upstream. The calculation of the lane widths via ATOM_PPLIB_PCIE_LINK_WIDTH_MASK and ATOM_PPLIB_PCIE_LINK_WIDTH_SHIFT macros did not increment the resulting value, per the comment in pptable.h ("lanes - 1"), and per usage elsewhere. Port of the radeon fix to amdgpu. Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Chunming Zhou <david1.zhou@amd.com> Bug: https://bugs.freedesktop.org/show_bug.cgi?id=102553 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/amdgpu: Fix always_valid bos multiple LRU insertions.Bas Nieuwenhuizen
commit a20ee0b1f8b42e2568f3a4408003d22b2dfcc706 upstream. If these bos are evicted and are in the validated list things blow up, so do not put them in there. Notably, that tries to add the bo to the LRU twice, which results in a BUG_ON in ttm_bo.c. While for the bo_list an alternative would be to not allow always valid bos in there, that does not work for the user fence. v2: Fixed whitespace issue pointed out by checkpatch.pl Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24drm/amdgpu: Add an ATPX quirk for hybrid laptopAlex Deucher
commit 13b40935cf64f59b93cf1c716a2033488e5a228c upstream. _PR3 doesn't seem to work properly, use ATPX instead. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104064 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ext4: don't allow r/w mounts if metadata blocks overlap the superblockTheodore Ts'o
commit 18db4b4e6fc31eda838dd1c1296d67dbcb3dc957 upstream. If some metadata block, such as an allocation bitmap, overlaps the superblock, it's very likely that if the file system is mounted read/write, the results will not be pretty. So disallow r/w mounts for file systems corrupted in this particular way. Backport notes: 3.18.y is missing bc98a42c1f7d ("VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)") and e462ec50cb5f ("VFS: Differentiate mount flags (MS_*) from internal superblock flags") so we simply use the sb MS_RDONLY check from pre bc98a42c1f7d in place of the sb_rdonly function used in the upstream variant of the patch. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Harsh Shandilya <harsh@prjkt.io> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: pcm: Fix endless loop for XRUN recovery in OSS emulationTakashi Iwai
commit e15dc99dbb9cf99f6432e8e3c0b3a8f7a3403a86 upstream. The commit 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") split the PCM preparation code to a locked version, and it added a sanity check of runtime->oss.prepare flag along with the change. This leaded to an endless loop when the stream gets XRUN: namely, snd_pcm_oss_write3() and co call snd_pcm_oss_prepare() without setting runtime->oss.prepare flag and the loop continues until the PCM state reaches to another one. As the function is supposed to execute the preparation unconditionally, drop the invalid state check there. The bug was triggered by syzkaller. Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") Reported-by: syzbot+150189c103427d31a053@syzkaller.appspotmail.com Reported-by: syzbot+7e3f31a52646f939c052@syzkaller.appspotmail.com Reported-by: syzbot+4f2016cf5185da7759dc@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: pcm: Fix mutex unbalance in OSS emulation ioctlsTakashi Iwai
commit f6d297df4dd47ef949540e4a201230d0c5308325 upstream. The previous fix 40cab6e88cb0 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams") introduced some mutex unbalance; the check of runtime->oss.rw_ref was inserted in a wrong place after the mutex lock. This patch fixes the inconsistency by rewriting with the helper functions to lock/unlock parameters with the stream check. Fixes: 40cab6e88cb0 ("ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streamsTakashi Iwai
commit 40cab6e88cb0b6c56d3f30b7491a20e803f948f6 upstream. OSS PCM stream management isn't modal but it allows ioctls issued at any time for changing the parameters. In the previous hardening patch ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write"), we covered these races and prevent the corruption by protecting the concurrent accesses via params_lock mutex. However, this means that some ioctls that try to change the stream parameter (e.g. channels or format) would be blocked until the read/write finishes, and it may take really long. Basically changing the parameter while reading/writing is an invalid operation, hence it's even more user-friendly from the API POV if it returns -EBUSY in such a situation. This patch adds such checks in the relevant ioctls with the addition of read/write access refcount. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: pcm: Avoid potential races between OSS ioctls and read/writeTakashi Iwai
commit 02a5d6925cd34c3b774bdb8eefb057c40a30e870 upstream. Although we apply the params_lock mutex to the whole read and write operations as well as snd_pcm_oss_change_params(), we may still face some races. First off, the params_lock is taken inside the read and write loop. This is intentional for avoiding the too long locking, but it allows the in-between parameter change, which might lead to invalid pointers. We check the readiness of the stream and set up via snd_pcm_oss_make_ready() at the beginning of read and write, but it's called only once, by assuming that it remains ready in the rest. Second, many ioctls that may change the actual parameters (i.e. setting runtime->oss.params=1) aren't protected, hence they can be processed in a half-baked state. This patch is an attempt to plug these holes. The stream readiness check is moved inside the read/write inner loop, so that the stream is always set up in a proper state before further processing. Also, each ioctl that may change the parameter is wrapped with the params_lock for avoiding the races. The issues were triggered by syzkaller in a few different scenarios, particularly the one below appearing as GPF in loopback_pos_update. Reported-by: syzbot+c4227aec125487ec3efa@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24ALSA: pcm: Use ERESTARTSYS instead of EINTR in OSS emulationTakashi Iwai
commit c64ed5dd9feba193c76eb460b451225ac2a0d87b upstream. Fix the last standing EINTR in the whole subsystem. Use more correct ERESTARTSYS for pending signals. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24vfio/pci: Virtualize Maximum Read Request SizeAlex Williamson
commit cf0d53ba4947aad6e471491d5b20a567cbe92e56 upstream. MRRS defines the maximum read request size a device is allowed to make. Drivers will often increase this to allow more data transfer with a single request. Completions to this request are bound by the MPS setting for the bus. Aside from device quirks (none known), it doesn't seem to make sense to set an MRRS value less than MPS, yet this is a likely scenario given that user drivers do not have a system-wide view of the PCI topology. Virtualize MRRS such that the user can set MRRS >= MPS, but use MPS as the floor value that we'll write to hardware. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24watchdog: f71808e_wdt: Fix WD_EN register readIgor Pylypiv
commit 977f6f68331f94bb72ad84ee96b7b87ce737d89d upstream. F71808FG_FLAG_WD_EN defines bit position, not a bitmask Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4Sean Wang
commit 55a5fcafe3a94e8a0777bb993d09107d362258d2 upstream. Just add binding for a fixed-factor clock axisel_d4, which would be referenced by PWM devices on MT7623 or MT2701 SoC. Cc: stable@vger.kernel.org Fixes: 1de9b21633d6 ("clk: mediatek: Add dt-bindings for MT2701 clocks") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24thermal: imx: Fix race condition in imx_thermal_probe()Mikhail Lappo
commit cf1ba1d73a33944d8c1a75370a35434bf146b8a7 upstream. When device boots with T > T_trip_1 and requests interrupt, the race condition takes place. The interrupt comes before THERMAL_DEVICE_ENABLED is set. This leads to an attempt to reading sensor value from irq and disabling the sensor, based on the data->mode field, which expected to be THERMAL_DEVICE_ENABLED, but still stays as THERMAL_DEVICE_DISABLED. Afher this issue sensor is never re-enabled, as the driver state is wrong. Fix this problem by setting the 'data' members prior to requesting the interrupts. Fixes: 37713a1e8e4c ("thermal: imx: implement thermal alarm interrupt handling") Cc: <stable@vger.kernel.org> Signed-off-by: Mikhail Lappo <mikhail.lappo@esrlabs.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24pwm: rcar: Fix a condition to prevent mismatch value setting to dutyRyo Kodama
commit 6225f9c64b40bc8a22503e9cda70f55d7a9dd3c6 upstream. This patch fixes an issue that is possible to set mismatch value to duty for R-Car PWM if we input the following commands: # cd /sys/class/pwm/<pwmchip>/ # echo 0 > export # cd pwm0 # echo 30 > period # echo 30 > duty_cycle # echo 0 > duty_cycle # cat duty_cycle 0 # echo 1 > enable --> Then, the actual duty_cycle is 30, not 0. So, this patch adds a condition into rcar_pwm_config() to fix this issue. Signed-off-by: Ryo Kodama <ryo.kodama.vz@renesas.com> [shimoda: revise the commit log and add Fixes and Cc tags] Fixes: ed6c1476bf7f ("pwm: Add support for R-Car PWM Timer") Cc: Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24clk: bcm2835: De-assert/assert PLL reset signal when appropriateBoris Brezillon
commit 753872373b599384ac7df809aa61ea12d1c4d5d1 upstream. In order to enable a PLL, not only the PLL has to be powered up and locked, but you also have to de-assert the reset signal. The last part was missing. Add it so PLLs that were not enabled by the FW/bootloader can be enabled from Linux. Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24clk: fix false-positive Wmaybe-uninitialized warningArnd Bergmann
commit ce33f284935e08229046b30635e6aadcbab02b53 upstream. When we build this driver with on x86-32, gcc produces a false-positive warning: drivers/clk/renesas/clk-sh73a0.c: In function 'sh73a0_cpg_clocks_init': drivers/clk/renesas/clk-sh73a0.c:155:10: error: 'parent_name' may be used uninitialized in this function [-Werror=maybe-uninitialized] return clk_register_fixed_factor(NULL, name, parent_name, 0, We can work around that warning by adding a fake initialization, I tried and failed to come up with any better workaround. This is currently one of few remaining warnings for a 4.14.y randconfig build, so it would be good to also have it backported at least to that version. Older versions have more randconfig warnings, so we might not care. I had not noticed this earlier, because one patch in my randconfig test tree removes the '-ffreestanding' option on x86-32, and that avoids the warning. The -ffreestanding flag was originally global but moved into arch/i386 by Andi Kleen in commit 6edfba1b33c7 ("[PATCH] x86_64: Don't define string functions to builtin") as a 'temporary workaround'. Like many temporary hacks, this turned out to be rather long-lived, from all I can tell we still need a simple fix to asm/string_32.h before it can be removed, but I'm not sure about how to best do that. Cc: stable@vger.kernel.org Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24clk: mvebu: armada-38x: add support for missing clocksRichard Genoud
commit 6a4a4595804548e173f0763a0e7274a3521c59a9 upstream. Clearfog boards can come with a CPU clocked at 1600MHz (commercial) or 1333MHz (industrial). They have also some dip-switches to select a different clock (666, 800, 1066, 1200). The funny thing is that the recovery button is on the MPP34 fq selector. So, when booting an industrial board with this button down, the frequency 666MHz is selected (and the kernel didn't boot). This patch add all the missing clocks. The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ). Fixes: 0e85aeced4d6 ("clk: mvebu: add clock support for Armada 380/385") Cc: <stable@vger.kernel.org> # 3.16.x: 9593f4f56cf5: clk: mvebu: armada-38x: add support for 1866MHz variants Cc: <stable@vger.kernel.org> # 3.16.x Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24clk: mvebu: armada-38x: add support for 1866MHz variantsRalph Sennhauser
commit 9593f4f56cf5d1c443f66660a0c7f01de38f979d upstream. The Linksys WRT3200ACM CPU is clocked at 1866MHz. Add 1866MHz to the list of supported CPU frequencies. Also update multiplier and divisor for the l2clk and ddrclk. Noticed by the following warning: [ 0.000000] Selected CPU frequency (16) unsupported Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24mmc: jz4740: Fix race condition in IRQ mask updateAlex Smith
commit a04f0017c22453613d5f423326b190c61e3b4f98 upstream. A spinlock is held while updating the internal copy of the IRQ mask, but not while writing it to the actual IMASK register. After the lock is released, an IRQ can occur before the IMASK register is written. If handling this IRQ causes the mask to be changed, when the handler returns back to the middle of the first mask update, a stale value will be written to the mask register. If this causes an IRQ to become unmasked that cannot have its status cleared by writing a 1 to it in the IREG register, e.g. the SDIO IRQ, then we can end up stuck with the same IRQ repeatedly being fired but not handled. Normally the MMC IRQ handler attempts to clear any unexpected IRQs by writing IREG, but for those that cannot be cleared in this way then the IRQ will just repeatedly fire. This was resulting in lockups after a while of using Wi-Fi on the CI20 (GitHub issue #19). Resolve by holding the spinlock until after the IMASK register has been updated. Cc: stable@vger.kernel.org Link: https://github.com/MIPS/CI20_linux/issues/19 Fixes: 61bfbdb85687 ("MMC: Add support for the controller on JZ4740 SoCs.") Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24iommu/vt-d: Fix a potential memory leakLu Baolu
commit bbe4b3af9d9e3172fb9aa1f8dcdfaedcb381fc64 upstream. A memory block was allocated in intel_svm_bind_mm() but never freed in a failure path. This patch fixes this by free it to avoid memory leakage. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Fixes: 2f26e0a9c9860 ('iommu/vt-d: Add basic SVM PASID support') Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24um: Use POSIX ucontext_t instead of struct ucontextKrzysztof Mazur
commit 4d1a535b8ec5e74b42dfd9dc809142653b2597f6 upstream. glibc 2.26 removed the 'struct ucontext' to "improve" POSIX compliance and break programs, including User Mode Linux. Fix User Mode Linux by using POSIX ucontext_t. This fixes: arch/um/os-Linux/signal.c: In function 'hard_handler': arch/um/os-Linux/signal.c:163:22: error: dereferencing pointer to incomplete type 'struct ucontext' mcontext_t *mc = &uc->uc_mcontext; arch/x86/um/stub_segv.c: In function 'stub_segv_handler': arch/x86/um/stub_segv.c:16:13: error: dereferencing pointer to incomplete type 'struct ucontext' &uc->uc_mcontext); Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24um: Compile with modern headersJason A. Donenfeld
commit 530ba6c7cb3c22435a4d26de47037bb6f86a5329 upstream. Recent libcs have gotten a bit more strict, so we actually need to include the right headers and use the right types. This enables UML to compile again. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-24nfit, address-range-scrub: fix scrub in-progress reportingDan Williams
commit 78727137fdf49edf9f731bde79d7189067b4047a upstream. There is a small window whereby ARS scan requests can schedule work that userspace will miss when polling scrub_show. Hold the init_mutex lock over calls to report the status to close this potential escape. Also, make sure that requests to cancel the ARS workqueue are treated as an idle event. Cc: <stable@vger.kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Fixes: 37b137ff8c83 ("nfit, libnvdimm: allow an ARS scrub...") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>